Dromida Wheel/Tire Assembled MT 4.18 (2)

This ia the Wheel and Tire Assembly for the
Dromida MT4.18 Monster Truck, DIDC0042.

FEATURES:
Rubber tires with off-road tread
Plastic wheels, gray in color

INCLUDES:
2 Wheels and Tires

SPECS:
Width: 1.2" (29.5mm)
Outer Diameter: 2.5" (65mm)
Hex Size: 0.31" (8mm)

This item compliments the main item right here.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits front or rear suspension

INCLUDES:
2 Lower Suspension Arms

You will like this item if you have the item previously stated.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Changes worn or damaged steering servos
Waterproof under typical operating conditions

INCLUDES:
Steering Servo with Wire Lead and Connector

SPECS:
Measurements: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specs such as speed and torque not offered by producer

The listed below item additionally pairs really well with the item being discussed.



This is the DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load.

FEATURES:
For use with the Duratrax Vendetta, Mini Quake and Cliff Climber however
    can also be utilized in other 1/18 scale applications

INCLUDES:
DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load with mini
    female port

NEEDS:
Battery charger with the ability of charging NiMH batteries, such as the DuraTrax
    IntelliPeak series or the Great Planes TRITON series

SPECS:
Capacity: 1600mAh
Cell Size: 2/3A
# of Cells in Series: 6
Ranked Voltage: 7.2V
Minutes. Release Voltage: 5.4V
Maximum Recommended Charge Current: 1.2A
Discharge Lead: 20AWG 2.4" (60mm) long wire
Pack Measurements: 86 x 34 x 17mm (3.38 x 1.33 x 0.66 inches)
Weight: 147g (5.2oz)
Number of welds per connection: 6
Connector: 1/18 scale mini female

Many others have actually gotten this item along with the item that you are currently reviewing.

Tool ST81/02 10 49 62 84

This is a replacement set of tools which comes with the Tamiya Super
Blackfoot.

Includes: (1) 4-way box wrench
(2) hex (allen) wrenches - 1 big, 1 little
(4) 3mm set screws

Requires: Absolutely nothing else needed. These are stock parts.

Many others have actually gotten this item along with the item that you are currently reviewing.

Diff 38T Ring & 15T Pinion Gear BX MT SC 4.18

These are the Differential Ring and Pinion Gears
for the Dromida SC, MT and BX Vehicles.

FEATURES:
Nylon building

INCLUDES:
Differential Ring and Pinion Gears
Four 2x8mm Maker Screws

This is a amazing enhancement to the item currently being discussed.

Shock Spring Long Heavy Orange SC4.18 (2)

Below is an additional item that compliments the item being discussed.

Aluminum Oil Shock Long Blue BX MT SC 4.18 (2)

This is a pair of optional Dromida Long Aluminum Body Shocks.

FEATURES:
Fits the Dromida SC4.18, MT4.18 and the BX4.18 vehicles
Aluminum building, blue in color

INCLUDES:
2 Dromida Long Aluminum Body Shocks

COMMENTS:
Springs not consisted of

This is a amazing enhancement to the item currently being discussed.



This is the optional Aluminum Axle Set
for the Dromida SC, MT and BX Vehicles.

FEATURES:
Aluminum building, blue in color
Changes stock plastic axles

INCLUDES:
Four Aluminum Axles
Four 2.5mm O-Rings