Dromida Wheel Axle Set BX MT SC 4.18 (4)

This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction

SUCHES AS:
Four Axles
Four 2.5mm O-Rings

Below is a excellent thing that lots of others have bought at the same time.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

SUCHES AS:
Four O-Rings
    Four Springs, essential #35

Get this thing to boost the one you are reading around.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction
Fits front or rear suspension

SUCHES AS:
Two Lower Suspension Arms

Below is a excellent thing that lots of others have bought at the same time.



Below is a excellent thing that lots of others have bought at the same time.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Fastens A-Arms to chassis

SUCHES AS:
Two Front and 2 Rear Inner Hinge Pins

This thing praises the main item here.

Steering Knuckle BX MT SC 4.18 (2)

Several others have bought this thing in addition to the thing that you are presently reviewing.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

SUCHES AS:
Four Dogbones

The below thing also sets truly well with the thing being reviewed.

Hub Carrier Front BX MT SC 4.18 (2)

Regularly bought with the thing that you are presently reviewing.

Tool ST81/02 10 49 62 84

This is a replacement set of tools which has the Tamiya Super
Blackfoot.

Includes: (1) 4-way box wrench
(2) hex (allen) wrenches - 1 large, 1 little
(4) 3mm set screws

Requires: Nothing else required. These are stock parts.

Get this thing to boost the one you are reading around.

Rear Hub BX MT SC 4.18 (2)

These are the Back Hubs for the Dromida SC, BX and MT Vehicles.

FEATURES:
Plastic building and construction

SUCHES AS:
Two Back Hubs

NEEDS:
Four 8x12mm Ball Bearings, order DIDC1071

Below is a excellent thing that lots of others have bought at the same time.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction

SUCHES AS:
Ten Body Clips

Regularly bought with the thing that you are presently reviewing.

Nylon Insert Steel Lock Nuts 3mm (6)

These are the 3mm Locknuts for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction, with nylon insert

SUCHES AS:
6 3mm Locknuts

Several others have bought this thing in addition to the thing that you are presently reviewing.



This is the Servo Saver Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal and plastic building and construction
Assists to avoid damage to the servo in the event of a front end
    collision

SUCHES AS:
Spline, Arm, Spring, and Cap
One 2x10mm Round Head Device Screw
One 2.6x5mm Washer

This thing is regularly bought with the above discussed thing.

Shock Spring Long Medium Soft Yellow MT4.18 (2)

Regularly bought with the thing that you are presently reviewing.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Changes used or damaged steering servos
Waterproof under typical operating conditions

SUCHES AS:
Steering Servo with Wire Lead and Connector

SPECIFICATIONS:
Measurements: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specifications such as speed and torque not supplied by producer

This is a superb addition to the thing presently being reviewed.



This is a set of Wheels and Tires
for the Dromida TT4.18 Trail Truck, and DT4.18 Desert Truggy.

FEATURES:
Rubber tires with deep off-road tread
5 spoke plastic wheels, silver in color

SUCHES AS:
Two Wheels and Tires

SPECIFICATIONS:
Outer Size: 2.2" (56mm)
Width: 0.94" (24mm)
Hex Size: 8mm