Dromida Wheel Axle Set BX MT SC 4.18 (4)

This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction

CONSISTS OF:
Four Axles
Four 2.5mm O-Rings

Here is a wonderful product that lots of others have bought at the very same time.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

CONSISTS OF:
Four O-Rings
    Four Springs, crucial #35

Get this product to enhance the one you read around.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction
Fits front or rear suspension

CONSISTS OF:
2 Lower Suspension Arms

Here is a wonderful product that lots of others have bought at the very same time.



Here is a wonderful product that lots of others have bought at the very same time.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Fastens A-Arms to chassis

CONSISTS OF:
2 Front and two Rear Inner Hinge Pins

This product praises the main item here.

Steering Knuckle BX MT SC 4.18 (2)

Numerous others have acquired this product together with the product that you are currently checking out.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
Four Dogbones

The listed below product likewise sets actually well with the product being reviewed.

Hub Carrier Front BX MT SC 4.18 (2)

Often acquired with the product that you are currently checking out.

Tool ST81/02 10 49 62 84

This is a replacement set of tools which has the Tamiya Super
Blackfoot.

Includes: (1) 4-way box wrench
(2) hex (allen) wrenches - 1 big, 1 small
(4) 3mm set screws

Needs: Nothing else needed. These are stock parts.

Get this product to enhance the one you read around.

Rear Hub BX MT SC 4.18 (2)

These are the Rear Hubs for the Dromida SC, BX and MT Vehicles.

FEATURES:
Plastic building and construction

CONSISTS OF:
2 Rear Hubs

NEEDS:
Four 8x12mm Ball Bearings, order DIDC1071

Here is a wonderful product that lots of others have bought at the very same time.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
10 Body Clips

Often acquired with the product that you are currently checking out.

Nylon Insert Steel Lock Nuts 3mm (6)

These are the 3mm Locknuts for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction, with nylon insert

CONSISTS OF:
6 3mm Locknuts

Numerous others have acquired this product together with the product that you are currently checking out.



This is the Servo Saver Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal and plastic building and construction
Assists to avoid damage to the servo in the event of a front end
    collision

CONSISTS OF:
Spline, Arm, Spring, and Cap
One 2x10mm Round Head Device Screw
One 2.6x5mm Washer

This product is often acquired with the above mentioned product.



Often acquired with the product that you are currently checking out.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Changes used or damaged steering servos
Waterproof under typical operating conditions

CONSISTS OF:
Steering Servo with Wire Lead and Adapter

SPECIFICATIONS:
Dimensions: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specifications such as speed and torque not supplied by producer

This is a great enhancement to the product currently being reviewed.



This is a set of Wheels and Tires
for the Dromida TT4.18 Trail Truck, and DT4.18 Desert Truggy.

FEATURES:
Rubber tires with deep off-road tread
5 spoke plastic wheels, silver in color

CONSISTS OF:
2 Wheels and Tires

SPECIFICATIONS:
Outer Size: 2.2" (56mm)
Width: 0.94" (24mm)
Hex Size: 8mm