Traxxas Slash 1/16 4Wd S.C. Truck, Rtr. W/ Tq 2.4Ghz Radio, 550 Motor, 1

This is the electrical powered, 2.4GHz radio managed, prepared to run
    1/16 scale Traxxas Slash Short-Course Racing Truck.

FEATURES:
Chassis: Nylon composite building 0.08" (2mm) thick bath tub type
Drive: Four wheel
Radio: Traxxas TQ 2.4GHz high output with Traxxas Link automated
    model acknowledgment, water resistant high torque digital micro steering
    servo
Electronic Speed Control: Traxxas XL2.5 with high present connector,
    reverse, 3 driving profiles, pushbutton setup and thermal shutdown
    protection
Motor: Traxxas Titan 12 turn, 550 size brushed
Spur Equipment: 45 tooth
Pinion Equipment: 31 tooth 48 pitch
Battery: One Traxxas Power Cell 1200mAh 6-cell NiMH w/high present
    connector, double NiMH battery capability (extra battery (TRAC2925)
    and parallel adapter (TRAP3064) not suched as and need to be acquired
    separately).
Battery Battery charger: 2A DC Peak Finding Quick Battery charger
Body: Painted and cut with applied decals
Bumpers: Front and rear, composite building
Shocks: GTR oil filled
Suspension: Revo-spec rocker actuated long travel inboard type with
    telescoping universal joint shafts
Transmission: Ball bearing equipped with adjustable slipper clutch
Differentials: Sealed silicone filled planetary equipment type
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when seen from front or behind car
Tires: Multi terrain, with foam inserts 1" (26mm) wide, 2.6" (67mm)
    diameter
Wheels: 5-spoke brushed chrome, 0.98" (25mm) wide, 1.4" (35mm)
    diameter, basic size 12mm hex
Steering: Steering arm with spring crammed servo protection

CONSISTS OF:
RTR Traxxas Slash Short-Course Racing Truck with TQ 2.4GHz
    radio, ESC, painted body, 6-cell battery, battery charger, extra pinion
    equipment, brushed motor and user's manual

REQUIRES:
AA Cells: Four for transmitter

SPECS:
Vehicle-
Length: 14" (356mm)
Width: 7.3" (185mm)
Height: 4.92" (125mm)
Front and Rear Track: 7.3" (185mm) distance in between external edges of
    wheels
Wheelbase: 8.1" (206mm)
Ground Clearance: 1.5" (38mm)
Overall Drive Ratio: 7.32:1
    Body-
Length: 13.4" (340mm)
Width: 7.1" (180mm) at rear wheels, best point
5.7" (146mm) behind front wheels, narrowest point
Height: 3.4" (86mm)

REMARKS:
The 1/16 scale Traxxas Slash Short-Course Truck is offered in the
    following body colors:
Black and Red, TRAC38LR Red and Black, TRAC38RL
Black and Silver, TRAC38LS Silver and Black, TRAC38SL

The ball bearings in the Traxxas Slash are rubber closed.
Following are the stock numbers for the replacement bearings from
    Traxxas and non-rubber sealed alternatives from Duratrax;
    Qty. Size Place Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 4x8mm Fr Diff 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Equipment 1 TRAC7019 DTXC1511