Dromida Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction
Fits front or rear suspension

INCLUDES:
2 Lower Suspension Arms

The below product also pairs really well with the product being discussed.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

INCLUDES:
4 Dogbones

You will certainly enjoy this thing if you have the thing just above stated.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Fastens A-Arms to chassis

INCLUDES:
2 Front and two Rear Inner Hinge Pins

Many others have acquired this product along with the product that you are presently checking out.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

INCLUDES:
4 O-Rings
    4 Springs, essential #35

Want an additional wonderful product to match the above stated product?

Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

INCLUDES:
One Front and one Rear Hinge Pin Holder
2 2x14mm Flat Head Screws
2 2x10mm Flat head Screws

This product is frequently acquired with the above stated product.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
10 Body Clips

The below product also pairs really well with the product being discussed.

Hinge Pin 2x22mm BX MT SC 4.18 (4)

These are the 2x22mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Fastens A-Arms to front and rear uprights

INCLUDES:
2 Front and two Rear Outer Hinge Pins

This product compliments the above discussed product.

Shock Long BX MT SC 4.18 (2)

This is a set of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Assembled and all set to set up

INCLUDES:
2 Long Shocks
2 each 1mm, 2mm and 4mm Preload Spacers
2 Spring Clamps

This is a great addition to the product presently being discussed.



This is the Front Bumper for the Dromida DB4.18 Desert Buggy.

FEATURES:
Constructed of plastic and aluminum

INCLUDES:
Bumper Assembly with Aluminum Plate
Installing Hardware

Below is a wonderful product that several others have purchased the same time.

Wheel Axle Set BX MT SC 4.18 (4)

This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction

INCLUDES:
4 Axles
4 2.5mm O-Rings

This product compliments the above discussed product.

Linkage Set BX MT SC 4.18

This is the Linkage Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic and metal building and construction

INCLUDES:
2 Plastic Tie Rods
Guiding Rod with Ball Cups
4 Metal Camber Rods with 8 Long Ball Cups

This product compliments the above discussed product.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Replaces worn or broken steering servos
Water resistant under typical operating conditions

INCLUDES:
Steering Servo with Wire Lead and Adapter

SPECS:
Measurements: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specifications such as speed and torque not supplied by producer