Dromida Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits front or rear suspension

CONSISTS OF:
2 Lower Suspension Arms

The below item also sets actually well with the item being discussed.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
4 Dogbones

You will enjoy this item if you have the item previously discussed.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to chassis

CONSISTS OF:
2 Front and 2 Rear Inner Hinge Pins

Many others have purchased this item in addition to the item that you are presently checking out.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
4 O-Rings
    4 Springs, essential #35

Want an additional fantastic item to match the above pointed out item?

Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
One Front and one Back Hinge Pin Holder
2 2x14mm Flat Head Screws
2 2x10mm Flat head Screws

This item is often purchased with the above pointed out item.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building

CONSISTS OF:
10 Body Clips

The below item also sets actually well with the item being discussed.

Hinge Pin 2x22mm BX MT SC 4.18 (4)

These are the 2x22mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to front and rear uprights

CONSISTS OF:
2 Front and 2 Rear Outer Hinge Pins

This item compliments the above discussed item.

Shock Long BX MT SC 4.18 (2)

This is a pair of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Put together and ready to set up

CONSISTS OF:
2 Long Shocks
2 each 1mm, 2mm and 4mm Preload Spacers
2 Spring Clamps

This is a superb addition to the item presently being discussed.



This is the Front Bumper for the Dromida DB4.18 Desert Buggy.

FEATURES:
Constructed of plastic and aluminum

CONSISTS OF:
Bumper Assembly with Aluminum Plate
Mounting Hardware

Here is a fantastic item that several others have bought at the exact same time.

Wheel Axle Set BX MT SC 4.18 (4)

This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building

CONSISTS OF:
4 Axles
4 2.5mm O-Rings

This item compliments the above discussed item.

Linkage Set BX MT SC 4.18

This is the Linkage Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic and metal building

CONSISTS OF:
2 Plastic Tie Rods
Steering Rod with Ball Cups
4 Metal Camber Rods with eight Long Ball Cups

This item compliments the above discussed item.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Changes used or damaged steering servos
Water resistant under regular operating conditions

CONSISTS OF:
Steering Servo with Wire Lead and Connector

SPECIFICATIONS:
Dimensions: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specs such as speed and torque not supplied by manufacturer