Dromida Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits front or rear suspension

CONSISTS OF:
Two Lower Suspension Arms

The listed below item also sets truly well with the item being gone over.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
Four Dogbones

You will love this product if you have the product above discussed.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to chassis

CONSISTS OF:
Two Front and 2 Rear Inner Hinge Pins

Several others have purchased this item along with the item that you are presently checking out.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

CONSISTS OF:
Four O-Rings
    Four Springs, crucial #35

Want an additional fantastic item to match the above mentioned item?

Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
One Front and one Back Hinge Pin Holder
Two 2x14mm Flat Head Screws
Two 2x10mm Flat head Screws

This item is often purchased with the above mentioned item.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building

CONSISTS OF:
10 Body Clips

The listed below item also sets truly well with the item being gone over.

Hinge Pin 2x22mm BX MT SC 4.18 (4)

These are the 2x22mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to front and rear uprights

CONSISTS OF:
Two Front and 2 Rear Outer Hinge Pins

This item praises the above gone over item.

Shock Long BX MT SC 4.18 (2)

This is a pair of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Put together and ready to install

CONSISTS OF:
Two Long Shocks
Two each 1mm, 2mm and 4mm Preload Spacers
Two Spring Clamps

This is a wonderful addition to the item presently being gone over.



This is the Front Bumper for the Dromida DB4.18 Desert Buggy.

FEATURES:
Constructed of plastic and aluminum

CONSISTS OF:
Bumper Assembly with Aluminum Plate
Mounting Hardware

Below is a fantastic item that lots of others have purchased the same time.

Wheel Axle Set BX MT SC 4.18 (4)

This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building

CONSISTS OF:
Four Axles
Four 2.5mm O-Rings

This item praises the above gone over item.

Linkage Set BX MT SC 4.18

This is the Linkage Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic and metal building

CONSISTS OF:
Two Plastic Tie Rods
Guiding Rod with Ball Cups
Four Metal Camber Rods with 8 Long Ball Cups

This item praises the above gone over item.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Replaces worn or damaged steering servos
Waterproof under typical operating conditions

CONSISTS OF:
Steering Servo with Wire Lead and Adapter

SPECIFICATIONS:
Measurements: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specifications such as speed and torque not provided by manufacturer