Dromida Steering Knuckle BX MT SC 4.18 (2)

Want an additional excellent item to match the above stated item?

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
Four O-Rings
    Four Springs, vital #35

This item compliments the main item below.



Want an additional excellent item to match the above stated item?

Wheel Axle Set BX MT SC 4.18 (4)

This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building

CONSISTS OF:
Four Axles
Four 2.5mm O-Rings

Often bought with the item that you are currently reading about.

Rear Hub BX MT SC 4.18 (2)

These are the Rear Hubs for the Dromida SC, BX and MT Vehicles.

FEATURES:
Plastic building

CONSISTS OF:
Two Rear Hubs

REQUIRES:
Four 8x12mm Ball Bearings, order DIDC1071

This is a fantastic enhancement to the item currently being talked about.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits front or rear suspension

CONSISTS OF:
Two Lower Suspension Arms

Get this item to enhance the one you are reading around.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to chassis

CONSISTS OF:
Two Front and 2 Rear Inner Hinge Pins

Below is a excellent item that many others have actually bought at the same time.

Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
One Front and one Rear Hinge Pin Holder
Two 2x14mm Flat Head Screws
Two 2x10mm Flat head Screws

Often bought with the item that you are currently reading about.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
Four Dogbones

Get this item to enhance the one you are reading around.



This is a set of 6x10mm Sealed Ball Bearings from Dromida.

FEATURES:
Sealed versus dirt and grit for long life
Utilized in Dromida automobiles, may also be utilized in any application
    requiring this size ball bearing

CONSISTS OF:
Two 6x10mm Sealed Ball Bearings

SPECS:
Outer Diameter: 10mm
Inner Diameter: 6mm
Thickness: 3mm