Dromida Steering Bellcrank Assembly BX MT SC 4.18

This is the Steering Bellcrank Assembly
for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction

CONSISTS OF:
Drag Link
One Right and one Left Steering Bellcrank
2 2x8mm Round Head Shoulder Screws

COMMENTS:
The two Ballstuds shown in the parts list of the handbook are not
    consisted of. Order DIDC1034 if these ballstuds are needed.

You will like this item if you have the item above pointed out.



This is the Servo Saver Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal and plastic building and construction
Assists to avoid damage to the servo in the event of a front end
    collision

CONSISTS OF:
Spline, Arm, Spring, and Cap
One 2x10mm Round Head Machine Screw
One 2.6x5mm Washer

Several others have actually bought this item along with the item that you are currently checking out.

Shock Spring Long Medium Soft Yellow MT4.18 (2)

Want one more wonderful item to compliment the above discussed item?

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
4 Dogbones

This item is often bought with the above discussed item.

Hub Carrier Front BX MT SC 4.18 (2)

The below item additionally sets actually well with the item being gone over.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

CONSISTS OF:
4 O-Rings
    4 Springs, essential #35

This item praises the above gone over item.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
10 Body Clips

This is a fantastic enhancement to the item currently being gone over.

Screw/Hardware Set BX MT SC 4.18

This is the Screw and Hardware set for the Dromida SC4.18, MT4.18,
and BX4.18 Vehicles.

FEATURES:
Steel building and construction
Sizes individually packaged

CONSISTS OF:
All Screws, Locknuts, E-Clips, Washers, Set Screw and Body Clips
    used in the assembly of the Dromida cars

Here is a wonderful item that lots of others have actually bought at the same time.

Linkage Set BX MT SC 4.18

This is the Linkage Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic and metal building and construction

CONSISTS OF:
2 Plastic Tie Rods
Guiding Rod with Ball Cups
4 Metal Camber Rods with 8 Long Ball Cups

This item praises the above gone over item.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction
Fits front or rear suspension

CONSISTS OF:
2 Lower Suspension Arms