Dromida Shock Long BX MT SC 4.18 (2)

This is a set of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Put together and prepared to install

CONSISTS OF:
Two Long Shocks
Two each 1mm, 2mm and 4mm Preload Spacers
Two Spring Clamps

This thing praises the above reviewed thing.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction
Fits front or rear suspension

CONSISTS OF:
Two Lower Suspension Arms

This thing praises the main item below.



This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

CONSISTS OF:
Four O-Rings
    Four Springs, vital #35

You will love this item if you have the item earlier pointed out.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
Ten Body Clips

Right here is one more thing that praises the thing being reviewed.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
Four Dogbones

This is a great addition to the thing currently being reviewed.



Right here is a terrific thing that many others have bought at the exact same time.



These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Fastens A-Arms to chassis

CONSISTS OF:
Two Front and two Rear Inner Hinge Pins

Get this thing to enhance the one you read around.

Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
One Front and one Rear Hinge Pin Holder
Two 2x14mm Flat Head Screws
Two 2x10mm Flat head Screws

This thing is often acquired with the above pointed out thing.



This is the Front Shock Tower for the Dromida MT Beast Truck, DIDC0042.

FEATURES:
Molded plastic building and construction, black in color

CONSISTS OF:
Front Shock Tower
Two Ball Studs
Four 2x8mm Round Head Screws
One Body Clip

Right here is a terrific thing that many others have bought at the exact same time.



    This is the optional set of Bonus Company Shock Springs
for the Dromida SC4.18. MT4.18, and BX4.18.

FUNCTIONS:
Steel building and construction
Offers firmer damping than stock shock springs for greater off-road
    control

CONSISTS OF:
Two Bonus Company Shock Springs

Often acquired with the thing that you are currently reading about.

Rear Hub BX MT SC 4.18 (2)

These are the Rear Hubs for the Dromida SC, BX and MT Vehicles.

FEATURES:
Plastic building and construction

CONSISTS OF:
Two Rear Hubs

REQUIRES:
Four 8x12mm Ball Bearings, order DIDC1071

Right here is a terrific thing that many others have bought at the exact same time.

40Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil used with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in heat or thicken up in cold weather

CONSISTS OF:
One bottle of silicone oil

SPECIFICATIONS:
40wt (the greater the weight number the thicker the oil)
2 oz. bottle

Right here is one more thing that praises the thing being reviewed.



This is the DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Pack.

FEATURES:
For usage with the Duratrax Vendetta, Mini Quake and Cliff Climber but
    can likewise be used in other 1/18 scale applications

CONSISTS OF:
DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Pack with mini
    female port

REQUIRES:
Battery charger with the ability of charging NiMH batteries, such as the DuraTrax
    IntelliPeak series or the Great Planes TRITON series

SPECIFICATIONS:
Capacity: 1600mAh
Cell Size: 2/3A
# of Cells in Series: 6
Ranked Voltage: 7.2V
Min. Release Voltage: 5.4V
Optimum Recommended Charge Current: 1.2A
Discharge Lead: 20AWG 2.4" (60mm) long wire
Pack Measurements: 86 x 34 x 17mm (3.38 x 1.33 x 0.66 inches)
Weight: 147g (5.2oz)
Variety of welds per connection: 6
Port: 1/18 scale mini female