Dromida Screw/Hardware Set BX MT SC 4.18

This is the Screw and Hardware set for the Dromida SC4.18, MT4.18,
and BX4.18 Vehicles.

FEATURES:
Steel construction
Sizes separately packaged

CONSISTS OF:
All Screws, Locknuts, E-Clips, Washers, Set Screw and Body Clips
    used in the assembly of the Dromida vehicles

Below is a terrific thing that many others have purchased the exact same time.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic construction
Fits front or rear suspension

CONSISTS OF:
2 Lower Suspension Arms

This thing praises the above gone over thing.



This is the 2.4GHz V2 2in1 Receiver/ESC and Steering Servo
for the Dromida SC, MT and BX Vehicles.

FEATURES:
One self contained device with pre-installed steering servo
Added connector for new Dromida vehicles with LED lights

CONSISTS OF:
Mix Receiver/ESC with Battery and Motor Connectors
Steering Servo, DIDM1001

Want another terrific thing to enhance the above mentioned thing?

Steering Bellcrank Assembly BX MT SC 4.18

This is the Steering Bellcrank Assembly
for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic construction

CONSISTS OF:
Drag Link
One Right and one Left Steering Bellcrank
2 2x8mm Round Head Shoulder Screws

REMARKS:
The 2 Ballstuds displayed in the parts list of the manual are not
    consisted of. Order DIDC1034 if these ballstuds are needed.

Below is another thing that praises the thing being gone over.

Shock Spring Long Medium Soft Yellow MT4.18 (2)

You will enjoy this thing if you have the thing above mentioned.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
4 Dogbones

This thing praises the above gone over thing.

Hub Carrier Front BX MT SC 4.18 (2)

Want another terrific thing to enhance the above mentioned thing?

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
4 O-Rings
    4 Springs, crucial #35

Many others have acquired this thing in addition to the thing that you are currently reading about.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel construction

CONSISTS OF:
10 Body Clips

Below is another thing that praises the thing being gone over.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal construction
Fastens A-Arms to chassis

CONSISTS OF:
2 Front and 2 Rear Inner Hinge Pins

This thing is frequently acquired with the above mentioned thing.

Hinge Pin 2x22mm BX MT SC 4.18 (4)

These are the 2x22mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal construction
Fastens A-Arms to front and rear uprights

CONSISTS OF:
2 Front and 2 Rear Outer Hinge Pins