Dromida Rear Hub BX MT SC 4.18 (2)

These are the Rear Hubs for the Dromida SC, BX and MT Vehicles.

FEATURES:
Plastic building

CONSISTS OF:
Two Rear Hubs

REQUIRES:
Four 8x12mm Ball Bearings, order DIDC1071

Below is a wonderful item that numerous others have actually bought at the exact same time.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
Four Dogbones

Below is a wonderful item that numerous others have actually bought at the exact same time.

Steering Knuckle BX MT SC 4.18 (2)

This item is regularly gotten with the above stated item.



The listed below item likewise sets actually well with the item being talked about.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to chassis

CONSISTS OF:
Two Front and 2 Rear Inner Hinge Pins

This item is regularly gotten with the above stated item.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

CONSISTS OF:
Four O-Rings
    Four Springs, essential #35

This item is regularly gotten with the above stated item.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building

CONSISTS OF:
10 Body Clips

Frequently gotten with the item that you are presently reading about.

Spur Gear 45T BX MT SC 4.18

This is the 45 Tooth Spur Gear for the Dromida SC, MT and BX Vehicles.

FEATURES:
Nylon building

CONSISTS OF:
45 Tooth Spur Gear

The listed below item likewise sets actually well with the item being talked about.

Wheel Axle Set BX MT SC 4.18 (4)

This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building

CONSISTS OF:
Four Axles
Four 2.5mm O-Rings

Many others have actually gotten this item in addition to the item that you are presently reading about.



This ia the Wheel and Tire Assembly for the
Dromida SC4.18 Short Course Truck, DIDC0041.

FEATURES:
Rubber tires with low triangular shaped tread
Plastic wheels, gray in color

CONSISTS OF:
Two Wheels and Tires

SPECS:
Width: 0.90" (23mm)
Outer Size: 2.2" (56mm)
Hex Size: 0.31" (8mm)

Get this item to enhance the one you are reading about.

Shock Long BX MT SC 4.18 (2)

This is a pair of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Assembled and ready to set up

CONSISTS OF:
Two Long Shocks
Two each 1mm, 2mm and 4mm Preload Spacers
Two Spring Clamps

This item is regularly gotten with the above stated item.

Shock Spring Long Medium Soft Yellow MT4.18 (2)

Many others have actually gotten this item in addition to the item that you are presently reading about.



This is a pair of 6x10mm Sealed Ball Bearings from Dromida.

FEATURES:
Sealed versus dirt and grit for long life
Utilized in Dromida vehicles, might likewise be utilized in any application
    needing this size ball bearing

CONSISTS OF:
Two 6x10mm Sealed Ball Bearings

SPECS:
Outer Size: 10mm
Inner Size: 6mm
Thickness: 3mm

You will love this thing if you have the thing previously pointed out.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits front or rear suspension

CONSISTS OF:
Two Lower Suspension Arms

Get this item to enhance the one you are reading about.

Hub Carrier Front BX MT SC 4.18 (2)