Dromida Rear Hub BX MT SC 4.18 (2)

These are the Rear Hubs for the Dromida SC, BX and MT Vehicles.

FEATURES:
Plastic construction

CONSISTS OF:
Two Rear Hubs

NEEDS:
4 8x12mm Ball Bearings, order DIDC1071

Right here is a great thing that several others have actually purchased the same time.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
4 Dogbones

Right here is a great thing that several others have actually purchased the same time.



This thing is often bought with the above mentioned thing.



The below thing also pairs actually well with the thing being discussed.



These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal construction
Fastens A-Arms to chassis

CONSISTS OF:
Two Front and two Rear Inner Hinge Pins

This thing is often bought with the above mentioned thing.



This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
4 O-Rings
    4 Springs, key #35

This thing is often bought with the above mentioned thing.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel construction

CONSISTS OF:
Ten Body Clips

Frequently bought with the thing that you are currently reading about.



This is the 45 Tooth Spur Gear for the Dromida SC, MT and BX Vehicles.

FEATURES:
Nylon construction

CONSISTS OF:
45 Tooth Spur Gear

The below thing also pairs actually well with the thing being discussed.



This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic construction

CONSISTS OF:
4 Axles
4 2.5mm O-Rings

Numerous others have actually bought this thing along with the thing that you are currently reading about.



This ia the Wheel and Tire Assembly for the
Dromida SC4.18 Short Course Truck, DIDC0041.

FEATURES:
Rubber tires with low triangular shaped tread
Plastic wheels, gray in color

CONSISTS OF:
Two Wheels and Tires

SPECS:
Width: 0.90" (23mm)
Outer Diameter: 2.2" (56mm)
Hex Size: 0.31" (8mm)

Get this thing to enhance the one you are reading about.

Shock Long BX MT SC 4.18 (2)

This is a pair of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Put together and prepared to install

CONSISTS OF:
Two Long Shocks
Two each 1mm, 2mm and 4mm Preload Spacers
Two Spring Clamps

This thing is often bought with the above mentioned thing.



Numerous others have actually bought this thing along with the thing that you are currently reading about.



This is a pair of 6x10mm Sealed Ball Bearings from Dromida.

FEATURES:
Sealed against dirt and grit for long life
Utilized in Dromida vehicles, might also be utilized in any application
    needing this size ball bearing

CONSISTS OF:
Two 6x10mm Sealed Ball Bearings

SPECS:
Outer Diameter: 10mm
Inner Diameter: 6mm
Thickness: 3mm

You will certainly like this thing if you have the thing above discussed.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic construction
Fits front or rear suspension

CONSISTS OF:
Two Lower Suspension Arms

Get this thing to enhance the one you are reading about.