Dromida Prop Set Red Ominus Quadcopter

This is the Propeller Embed in Red
for the Red and White Ominus Quadcopter DIDE01RW.

FEATURES:
Molded one-piece plastic building and construction

CONSISTS OF:
2 Red and 2 Black Props, vital #2
Four Screws

The below thing also pairs really well with the thing being talked about.



This is the 3.7V LiPo Battery for the Ominus Quadcopter from Dromida.
**Will NOT work in the Ominus FPV.**

FEATURES:
Stock replacement battery for the Dromida Ominus, DIDE01**

CONSISTS OF:
3.7V LiPo Battery with Wire Lead and 2-Pin Port

REQUIRES:
USB Charger, DIDP1120

SPECIFICATIONS:
Voltage Score: 3.7V
mAh Score: 700
Discharge Rate: 25C
Power Score: 2.6Wh

This is a wonderful enhancement to the thing presently being talked about.



This is the Gear Set for the Dromida Ominus Quadcopter DIDE01**.

FEATURES:
Plastic building and construction
Installs in primary frame and connects to propellers and primary gear
    shafts

CONSISTS OF:
Four Gears, vital #4

Right here is a terrific thing that many others have purchased the same time.



This is the 2.4GHz Radio Controlled, Electric Powered, Ready to Run
Ominus Quadcopter from Dromida.
For ages 14 and older
**Consists of radio, and might be likewise flown with any compatible transmitter**
**with the SLT (Secure Link Innovation) system.**

***Due to the advanced electronic devices and specialized transmitter***
***the original Ominus cannot be transformed or upgraded to the Ominus FPV.***

FEATURES:
Easy to fly inside or outdoors
Dromida Q100 FHSS 2.4GHz 2-channel radio with flight mode LED
    indication, flip button, throttle/rudder stick on left and
    aileron/elevator stick on right
LED lights for easy day or night tracking
Four flight modes, Easy, Normal, Advanced, Specialist
3 axis gyro stabilization, and three accelerometers for smooth
    and level flights
Carries out turns at the touch of a button on the transmitter
1S 3.7V 700mAh 25C 2.6Wh LiPo battery DIDP1100
USB LiPo charger, see REMARKS listed below
Resilient frame
Ninety day minimal warranty through Hobby Solutions starting at date
    of purchase

CONSISTS OF:
RTR Ominus Quadcopter
2 additional Black and 2 additional Red Blades
Four AAA Cells for Transmitter
Guideline Sheet

SPECIFICATIONS:
Diagonal Length: 9.4" (238mm)
Weight: 3.6oz (101g)

REMARKS:
Readily available in the following blade and body colors;
    Green and Black, DIDE01GG
    Red and White, DIDE01RW
    Yellow and Black, DIDE01YY
    Blue and Black, DIDE01BB

Air Conditioning adapter displayed in manual is not consisted of

This thing is regularly acquired with the above stated thing.



This is the Canopy for the Red and White Dromida Ominus Quadcopter DIDE01RW.

FEATURES:
Plastic building and construction
Ominus logo on top and red accents on both sides

CONSISTS OF:
Canopy, vital #1

Get this thing to enhance the one you are reading about.



This is the Propeller Embed in Blue
    for heaven and Black Ominus Quadcopter DIDE01BB.

FEATURES:
Molded one-piece plastic building and construction

CONSISTS OF:
2 Blue and 2 Black Props, vital #2
Four Screws

This thing is regularly acquired with the above stated thing.



    This is the Electric Powered, 2.4GHz Radio Controlled,
Ready to Fly Estes Proto-X Nano Quadcopter.
For Ages 14 and Above.
For Indoor Use Only.

Now Available in Six Body Colors;
Green, ESTE48GG Red, ESTE48RR
Black, ESTE48LL White, ESTE48WW
Purple, ESTE48PP Yellow, ESTE48YY

Additional propellers are readily available ESTE4615
Additional batteries are readily available ESTE4618

FEATURES:
Plastic body with window and trim information
LED light shows front and back of the heli, as well as helps in
    low light flying
4-channel 2.4GHz Radio with digital trims
Six axis gyro with an "Car Upright System" that self-corrects the
    quadcopter despite the direction that it's introduced
Four micro motors
100mAh 3.7V LiPo battery
USB charge cable
One-piece PCB frame

CONSISTS OF:
RTF Proto-X Nano Quadcopter, 2.4GHz Radio, LiPo Battery, USB Charge
    Cord, 4 spare rotor blades, and Instructions

REQUIRES:
AAA Batteries: 2 for transmitter

SPECIFICATIONS:
Dimensions: 1.8 x 1.8" (45 x 45mm)
Weight: 0.40oz (11.5g)

REMARKS:
For extra information or support for this item, please usage
    these resources -
    Email: airsupport@hobbico.com
    Web Site: http://www.hobbico.com/
    Phone: 217-398-8970

Due to its extremely little size, the Proto-X has an integrated LiPo battery
    that is not designed for replacement. Trying to remove or
    replace the Lipo battery will likely harm the quadcopter. In
    addition, accurate placement of the battery is vital for proper
    CG, balance and efficiency and isn't recommended for customer
    replacement.