Dromida Nylon Insert Steel Lock Nuts 3mm (6)

These are the 3mm Locknuts for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction, with nylon insert

CONSISTS OF:
6 3mm Locknuts

Want one more fantastic thing to compliment the above pointed out thing?

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction
Fits front or rear suspension

CONSISTS OF:
2 Lower Suspension Arms

You will like this item if you have the item just above stated.

Wheel Axle Set BX MT SC 4.18 (4)

This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction

CONSISTS OF:
4 Axles
4 2.5mm O-Rings

This thing praises the main item here.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
4 O-Rings
    4 Springs, crucial #35

Many others have actually gotten this thing in addition to the thing that you are currently reading about.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
10 Body Clips

Get this thing to enhance the one you are reading about.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Fastens A-Arms to chassis

CONSISTS OF:
2 Front and two Rear Inner Hinge Pins

This is a fantastic enhancement to the thing currently being talked about.

Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
One Front and one Rear Hinge Pin Holder
2 2x14mm Flat Head Screws
2 2x10mm Flat head Screws

This thing praises the main item here.



This is the Servo Saver Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal and plastic building and construction
Helps to avoid damage to the servo in the event of a front end
    accident

CONSISTS OF:
Spline, Arm, Spring, and Cap
One 2x10mm Round Head Maker Screw
One 2.6x5mm Washer