Dromida Main Motor Clock-wise Left/Front Right/Rear Ominus/FPV

This is the Left Front/Right Rear Clockwise Rotating Motor
for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Replacement Left Front/Right Rear Clockwise Rotating Motor with
Pinion Gear and Wire Lead with Port

CONSISTS OF:
Left Front/Right Rear Clockwise Rotating Motor, essential #9

COMMENTS:
Not interchangeable with other positions. For the Right Front/
Left Rear Counterclockwise Rotating Motor, order DIDE1131

Here is a wonderful product that many others have purchased the exact same time.



This is the Right Front/Left Rear Counterclockwise Rotating Motor
for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Replacement Right Front/Left Rear Counterclockwise Rotating Motor
with Pinion Gear and Wire Lead with Port

CONSISTS OF:
Right Front/Left Rear Counterclockwise Rotating Motor, essential #10

COMMENTS:
Not interchangeable with other positions. For the Left Front/
Right Rear Clockwise Rotating Motor, order DIDE1130.

Here is a wonderful product that many others have purchased the exact same time.

Main Gear Shaft Ominus Quadcopter

These are the Main Gear Shafts for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Aluminum building and construction
Transfers power from the motor to the main equipment set and propellers
    housed in the main frame

CONSISTS OF:
Four Main Gear Shafts, essential #5

This product is regularly gotten with the above discussed product.



This is the Gear Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Plastic building and construction
Installs in main frame and connects to propellers and main equipment
    shafts

CONSISTS OF:
Four Gears, essential #4

This product is regularly gotten with the above discussed product.

Motor Covers Ominus FPV

These are the Motor Covers for the Dromida Ominus Quadcopter FPV, DIDE02**.

FUNCTIONS:
Plastic building and construction
Attaches to main frame and holds motors in place

CONSISTS OF:
Four Motor Covers, essential #10

This product compliments the above discussed product.

Motor Cover Ominus Quadcopter

These are the Motor Covers for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Plastic building and construction
Holds motor in place on bottom of main frame

CONSISTS OF:
Four Motor Covers essential #8

You will like this product if you have the product earlier stated.



This is the 3.7V LiPo Battery for the Ominus Quadcopter from Dromida.
**Will NOT operate in the Ominus FPV.**

FUNCTIONS:
Stock replacement battery for the Dromida Ominus, DIDE01**

CONSISTS OF:
3.7V LiPo Battery with Wire Lead and 2-Pin Port

NEEDS:
USB Charger, DIDP1120

SPECS:
Voltage Rating: 3.7V
mAh Rating: 700
Discharge Rate: 25C
Power Rating: 2.6Wh

Get this product to boost the one you are reading around.



This is the Screw Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Steel building and construction with black and silver finish
All screws needed to set up propellers, motors and battery frame

CONSISTS OF:
Screw Set, essential #13

This product compliments the main item below.

Bearing Set Ominus/Ominus FPV Quadcopter

This is the Bearing Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Installs on each motor shaft at bottom of main frame, and between
    main frame and motor equipment

CONSISTS OF:
Eight 3x6x2mm Ball Bearings, essential #3

Regularly gotten with the product that you are presently checking out.



This is the ONE 3.7V 700mAh 35C LiPo Battery
for the Dromida Ominus Quadcopter FPV, DIDE02**.

FUNCTIONS:
Changes used or crash damaged battery in the Ominus FPV
Charges through USB port or A/C adapter (not included)

CONSISTS OF:
ONE 3.7V 700mAh 35C LiPo Battery with Red 2-Pin Port, essential #15

SPECS:
Dimensions: 1.6 x 0.98 x 0.35" (41.5 x 25 x 9mm)
mAh Rating: 700mAh
Voltage Rating: 3.7V
Discharge Rate: 35C
Watt Hours: 2.6