Dromida Linkage Set BX MT SC 4.18

This is the Linkage Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic and metal building and construction

INCLUDES:
Two Plastic Tie Rods
Steering Rod with Ball Cups
Four Metal Camber Rods with eight Long Ball Cups

This is a great addition to the item currently being gone over.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

INCLUDES:
Four Dogbones

This item praises the main item below.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

INCLUDES:
Four O-Rings
    Four Springs, essential #35

Get this item to enhance the one you read about.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction
Fits front or rear suspension

INCLUDES:
Two Lower Suspension Arms

This item praises the above gone over item.

Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

INCLUDES:
One Front and one Back Hinge Pin Holder
Two 2x14mm Flat Head Screws
Two 2x10mm Flat head Screws

Several others have actually acquired this item in addition to the item that you are currently reading about.



This is the Dromida 1/18 scale 2.4GHz Radio Controlled
DB4.18 Desert Buggy with Battery and Charger.

FEATURES:
Chassis: Plastic
Drive Full time four wheel drive
Differentials: Gear type
Motor: 370 size brushed
Radio: D100 2.4GHz radio system with trims and double rates
Battery: 6-cell 1300mAh NiMH
Battery Charger: Air Conditioner wall type
Shocks: Huge Bore oil-filled
Tires: High-traction with foam inserts
LED Lights: Four
Guarantee: Ninety day limited guarantee through Pastime Solutions
    beginning at date of purchase

INCLUDES:
DB4.18 Desert Buggy with Battery and Charger, LED Lights, 4 AA
    Batteries and Directions

SPECIFICATIONS:
Length: 11.5" (294mm)
Width: 7.0" (180mm)
Height: 3.8" (98mm)
Weight with Battery: 1.45pound (656g)

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Area Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Back Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Back Uprights 2 DTXC1581

Several others have actually acquired this item in addition to the item that you are currently reading about.

Ball Stud BX MT SC 4.18 (8)

These are the Ball Studs for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Attaches linkage rod ball ends to hub providers and guiding knuckles

INCLUDES:
8 Ball Studs

Get this item to enhance the one you read about.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Fastens A-Arms to chassis

INCLUDES:
Two Front and 2 Rear Inner Hinge Pins

This item praises the above gone over item.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
Ten Body Clips