Dromida Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
One Front and one Rear Hinge Pin Holder
2 2x14mm Flat Head Screws
2 2x10mm Flat head Screws

Get this item to improve the one you are reading about.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Fastens A-Arms to chassis

CONSISTS OF:
2 Front and two Rear Inner Hinge Pins

This item compliments the above gone over item.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction
Fits front or rear suspension

CONSISTS OF:
2 Lower Suspension Arms

This item is regularly purchased with the above mentioned item.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
4 Dogbones

You will certainly enjoy this item if you have the item above pointed out.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
4 O-Rings
    4 Springs, vital #35

Here is a wonderful item that several others have bought at the very same time.

Shock Long BX MT SC 4.18 (2)

This is a set of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Put together and all set to install

CONSISTS OF:
2 Long Shocks
2 each 1mm, 2mm and 4mm Preload Spacers
2 Spring Clamps

Want an additional wonderful item to compliment the above mentioned item?

Linkage Set BX MT SC 4.18

This is the Linkage Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic and metal building and construction

CONSISTS OF:
2 Plastic Tie Rods
Steering Rod with Ball Cups
4 Metal Camber Rods with 8 Long Ball Cups

The below item likewise pairs really well with the item being gone over.



This is the Front Bumper for the Dromida DB4.18 Desert Buggy.

FEATURES:
Constructed of plastic and aluminum

CONSISTS OF:
Bumper Assembly with Aluminum Plate
Installing Hardware

This item compliments the above gone over item.

Pinion Gear 10T .6 Module 2mm Shaft

This is the optional 10 Tooth .6 Module Pinion Equipment
for the Dromida MT4.18 Monster Truck.

FEATURES:
Metal building and construction

CONSISTS OF:
10 Tooth Pinion Equipment
3x3mm Set Screw

Many others have purchased this item along with the item that you are currently reading about.



This is the Bumper Set for the Dromida MT Monster Truck.

FEATURES:
Plastic building and construction, black in color
Versatile to hold up against minor crashes

CONSISTS OF:
Front and Rear Bumpers
4 2.8mm Round Head Screws