Dromida Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
4 Dogbones

Want another terrific item to enhance the above stated item?

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building and construction
Fits front or rear suspension

CONSISTS OF:
Two Lower Suspension Arms

This item is often bought with the above stated item.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

CONSISTS OF:
4 O-Rings
    4 Springs, vital #35

The listed below item also sets really well with the item being reviewed.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Fastens A-Arms to chassis

CONSISTS OF:
Two Front and 2 Rear Inner Hinge Pins

This item compliments the above reviewed item.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
10 Body Clips

This is a fantastic enhancement to the item currently being reviewed.

Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction with steel pins
Fits front and rear drive systems

CONSISTS OF:
One Front and one Rear Hinge Pin Holder
Two 2x14mm Flat Head Screws
Two 2x10mm Flat head Screws

Right here is a terrific item that numerous others have actually bought at the exact same time.



This is the DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Pack.

FEATURES:
For use with the Duratrax Vendetta, Mini Quake and Cliff Climber but
    can also be used in other 1/18 scale applications

CONSISTS OF:
DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Pack with mini
    female connector

REQUIRES:
Battery charger efficient in charging NiMH batteries, such as the DuraTrax
    IntelliPeak series or the Great Planes TRITON series

SPECS:
Capacity: 1600mAh
Cell Size: 2/3A
# of Cells in Series: 6
Rated Voltage: 7.2V
Min. Discharge Voltage: 5.4V
Maximum Recommended Charge Current: 1.2A
Discharge Lead: 20AWG 2.4" (60mm) long wire
Pack Measurements: 86 x 34 x 17mm (3.38 x 1.33 x 0.66 inches)
Weight: 147g (5.2oz)
Variety of welds per connection: 6
Connector: 1/18 scale mini female

This item compliments the above reviewed item.

Shock Tower Front MT 4.18

This is the Front Shock Tower for the Dromida MT Beast Truck, DIDC0042.

FEATURES:
Molded plastic building and construction, black in color

CONSISTS OF:
Front Shock Tower
Two Ball Studs
4 2x8mm Round Head Screws
One Body Clip

This item compliments the above reviewed item.

Shock Long BX MT SC 4.18 (2)

This is a pair of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Assembled and prepared to install

CONSISTS OF:
Two Long Shocks
Two each 1mm, 2mm and 4mm Preload Spacers
Two Spring Clamps

Right here is a terrific item that numerous others have actually bought at the exact same time.

Rear Hub BX MT SC 4.18 (2)

These are the Rear Hubs for the Dromida SC, BX and MT Vehicles.

FEATURES:
Plastic building and construction

CONSISTS OF:
Two Rear Hubs

REQUIRES:
4 8x12mm Ball Bearings, order DIDC1071