Dromida Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building

CONSISTS OF:
Ten Body Clips

This item compliments the main item right here.



This is the DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load.

FEATURES:
For usage with the Duratrax Vendetta, Mini Quake and Cliff Climber however
    can likewise be used in other 1/18 scale applications

CONSISTS OF:
DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load with mini
    female port

REQUIRES:
Battery charger with the ability of charging NiMH batteries, such as the DuraTrax
    IntelliPeak series or the Great Planes TRITON series

SPECIFICATIONS:
Capability: 1600mAh
Cell Size: 2/3A
# of Cells in Series: 6
Rated Voltage: 7.2V
Minutes. Release Voltage: 5.4V
Maximum Recommended Charge Current: 1.2A
Discharge Lead: 20AWG 2.4" (60mm) long wire
Pack Dimensions: 86 x 34 x 17mm (3.38 x 1.33 x 0.66 inches)
Weight: 147g (5.2oz)
Variety of welds per connection: 6
Connector: 1/18 scale mini female

Frequently gotten with the item that you are currently reading about.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits front or rear suspension

CONSISTS OF:
Two Lower Suspension Arms

You will love this thing if you have the thing previously pointed out.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
Four Dogbones

This item compliments the main item right here.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

CONSISTS OF:
Four O-Rings
    Four Springs, crucial #35

Want an additional excellent item to match the above discussed item?

Aluminum Dogbone/Drive Shaft Blue BX MT SC (4)

This is the optional Aluminum Dogbones
for the Dromida SC4.18, MT4.18 and BX4.18.

FEATURES:
Aluminum building, blue in color
Changes stock plastic dogbones
Fits front and rear drive systems

CONSISTS OF:
Four Aluminum Dogbones

Below is an additional item that compliments the item being talked about.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Changes worn or damaged steering servos
Water resistant under regular operating conditions

CONSISTS OF:
Steering Servo with Wire Lead and Connector

SPECIFICATIONS:
Dimensions: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specs such as speed and torque not supplied by producer

You will love this thing if you have the thing previously pointed out.

Battery Hold Down BX MT SC 4.18

This is the Battery Hold Down for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits over front and rear battery posts to hold battery in place

CONSISTS OF:
Battery Hold Down

Frequently gotten with the item that you are currently reading about.

Shock Tower Front MT 4.18

This is the Front Shock Tower for the Dromida MT Monster Truck, DIDC0042.

FEATURES:
Molded plastic building, black in color

CONSISTS OF:
Front Shock Tower
Two Ball Studs
Four 2x8mm Round Head Screws
One Body Clip