Dromida Battery Hold Down BX MT SC 4.18

This is the Battery Hold Down for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic construction
Fits over front and rear battery posts to hold battery in location

CONSISTS OF:
Battery Hold Down

Want one more terrific item to compliment the above mentioned item?

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel construction

CONSISTS OF:
10 Body Clips

This item is often acquired with the above mentioned item.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic construction
Fits front or rear suspension

CONSISTS OF:
2 Lower Suspension Arms

Want one more terrific item to compliment the above mentioned item?



This is the DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load.

FEATURES:
For use with the Duratrax Vendetta, Mini Quake and Cliff Climber but
    can also be utilized in other 1/18 scale applications

CONSISTS OF:
DuraTrax 1600mAh NiMH 7.2V 6 Cell Stick Battery Load with mini
    female connector

REQUIRES:
Battery charger efficient in charging NiMH batteries, such as the DuraTrax
    IntelliPeak series or the Great Planes TRITON series

SPECS:
Capacity: 1600mAh
Cell Size: 2/3A
# of Cells in Series: 6
Rated Voltage: 7.2V
Minutes. Release Voltage: 5.4V
Maximum Recommended Charge Current: 1.2A
Discharge Lead: 20AWG 2.4" (60mm) long wire
Pack Dimensions: 86 x 34 x 17mm (3.38 x 1.33 x 0.66 inches)
Weight: 147g (5.2oz)
Number of welds per connection: 6
Adapter: 1/18 scale mini female

This item praises the above reviewed item.



This is the stock 370 size Brushed Motor
for the Dromida SC, MT and BX Vehicles.

FEATURES:
Changes used or broken stock motors

CONSISTS OF:
370 size Brushed Motor with Adapter and 22AWG Wire Leads
2 3x6mm Socket Head Cap Screws
2 3x6mm Washers

This item is often acquired with the above mentioned item.

Battery Post Set BX MT SC 4.18

This is the Battery Post Set
    for the Dromida MT4.18, SC4.18, and BX4.18 Vehicles.

FEATURES:
Composite plastic construction

CONSISTS OF:
2 Battery Posts
2 2x7mm Screws
2 Clips

This is a amazing enhancement to the item currently being reviewed.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
Four O-Rings
    Four Springs, key #35

This item is often acquired with the above mentioned item.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Changes used or broken steering servos
Waterproof under typical operating conditions

CONSISTS OF:
Steering Servo with Wire Lead and Adapter

SPECS:
Dimensions: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specs such as speed and torque not offered by producer

Regularly acquired with the item that you are currently reading about.



This is the Front Bumper for the Dromida DB4.18 Desert Buggy.

FEATURES:
Constructed of plastic and aluminum

CONSISTS OF:
Bumper Assembly with Aluminum Plate
Installing Hardware