Dromida Ball Stud BX MT SC 4.18 (8)

These are the Ball Studs for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Attaches linkage rod ball ends to center providers and steering knuckles

CONSISTS OF:
8 Ball Studs

This item compliments the main item below.

Aluminum Oil Shock Long Blue BX MT SC 4.18 (2)

This is a set of optional Dromida Long Aluminum Body Shocks.

FEATURES:
Fits the Dromida SC4.18, MT4.18 and the BX4.18 vehicles
Aluminum building, blue in color

CONSISTS OF:
2 Dromida Long Aluminum Body Shocks

COMMENTS:
Springs not consisted of

This item compliments the main item below.

Shock Mount Upper BX MT SC 4.18 (4)

These are the Upper Shock Installs for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building
For front and rear shocks

CONSISTS OF:
Four Upper Shock Installs
Four 2.5x14mm Socket Head Cap Screws
2 2.6x5mm Washers

You will enjoy this thing if you have the thing previously pointed out.

Shock Spring Long Medium Soft Yellow MT4.18 (2)

Below is a terrific item that lots of others have actually purchased the same time.

Linkage Set BX MT SC 4.18

This is the Linkage Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic and metal building

CONSISTS OF:
2 Plastic Tie Rods
Guiding Rod with Ball Cups
Four Metal Camber Rods with 8 Long Ball Cups

Below is a terrific item that lots of others have actually purchased the same time.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits front or rear suspension

CONSISTS OF:
2 Lower Suspension Arms

Frequently bought with the item that you are presently checking out.

Shock Spring Long Silver/Extra Soft BX MT SC 4.18 (2)

    This is the optional set of Additional Soft Shock Springs
for the Dromida SC4.18. MT4.18, and BX4.18.

FEATURES:
Steel building
Offers softer damping than stock shock springs for higher off-road
    control

CONSISTS OF:
2 Additional Soft Shock Springs

This item compliments the above talked about item.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of assembled differential

CONSISTS OF:
Four O-Rings
    Four Springs, vital #35

This item is often bought with the above pointed out item.

Drive Train Aluminum Upgrade Kit BX MT SC 4.18

This is the optional Aluminum Drive Train Plan
for usage on the Dromida BX, SC and MT Vehicles.

FEATURES:
Upgrades the stock plastic drive train parts to aluminum
Blue in color

CONSISTS OF:
Center Drive Shaft, DIDC1107
Four Axles, DIDC1102
Four Dogbones, DIDC1108
Stimulate Gear w/O-Rings and Springs, DIDC1105

This item is often bought with the above pointed out item.

Hinge Pin 2x22mm BX MT SC 4.18 (4)

These are the 2x22mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to front and rear uprights

CONSISTS OF:
2 Front and two Rear Outer Hinge Pins

Below is a terrific item that lots of others have actually purchased the same time.

2.5Mm X 15 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are perfect for locations where a screwdriver will not
reach. They can be tighteded with an allen wrench or ball driver. The screws
come in a variety of diameters and lengths. This utilizes a 2.5mm balldriver
(BONR1110).