Dromida Aluminum Oil Shock Long Blue BX MT SC 4.18 (2)

This is a set of optional Dromida Long Aluminum Body Shocks.

FEATURES:
Fits the Dromida SC4.18, MT4.18 and the BX4.18 cars
Aluminum building and construction, blue in color

CONSISTS OF:
Two Dromida Long Aluminum Body Shocks

REMARKS:
Springs not included

Right here is a great item that lots of others have purchased the same time.



This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
4 O-Rings
    4 Springs, crucial #35

This item is frequently acquired with the above discussed item.



    This is the optional set of Additional Firm Shock Springs
for the Dromida SC4.18. MT4.18, and BX4.18.

FEATURES:
Steel building and construction
Offers firmer damping than stock shock springs for higher off-road
    control

CONSISTS OF:
Two Additional Firm Shock Springs

Get this item to boost the one you are reading around.



These are the Upper Shock Installs for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building and construction
For front and rear shocks

CONSISTS OF:
4 Upper Shock Installs
4 2.5x14mm Socket Head Cap Screws
Two 2.6x5mm Washers

This item is frequently acquired with the above discussed item.

Ball Stud BX MT SC 4.18 (8)

These are the Ball Studs for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building and construction
Connects linkage rod ball ends to center providers and steering knuckles

CONSISTS OF:
Eight Ball Studs

This item praises the main item right here.



    This is the optional set of Additional Soft Shock Springs
for the Dromida SC4.18. MT4.18, and BX4.18.

FEATURES:
Steel building and construction
Offers softer damping than stock shock springs for higher off-road
    control

CONSISTS OF:
Two Additional Soft Shock Springs

Right here is an additional item that praises the item being talked about.



This is a set of optional Aluminum Oil-Filled Short Front Shocks
for the BX4.18 Buggy from Dromida, DIDC0043.

FEATURES:
Aluminum body, blue in color
Replaces stock plastic body front shocks

CONSISTS OF:
Two Oil-Filled Short Front Shocks

REQUIRES:
Springs and shock oil of modeler's choice

The below item also pairs actually well with the item being talked about.



This is the optional Aluminum Dogbones
for the Dromida SC4.18, MT4.18 and BX4.18.

FEATURES:
Aluminum building and construction, blue in color
Replaces stock plastic dogbones
Fits front and rear drive systems

CONSISTS OF:
4 Aluminum Dogbones

Right here is an additional item that praises the item being talked about.



This is a set of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Put together and prepared to install

CONSISTS OF:
Two Long Shocks
Two each 1mm, 2mm and 4mm Preload Spacers
Two Spring Clamps

Several others have acquired this item in addition to the item that you are presently reviewing.



This item praises the main item right here.



This is a 2oz bottle of Racers Edge 45wt silicone shock oil utilized with oil filled shocks. Racers Edge shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in winter. The greater the weight number of the oil, the more damping your shocks will have when riding over bumps.

It is not recommened to mix oils of different brands, as the density of oils from different suppliers of the very same weight rating may vary! Stick to one brand name for all your oils, so that you will have a reproducible setup if you have to reconstruct your shocks.