Model: Dromida DIDC0080
Dist. #: DIDC0080
SKU: DIDC0080
Be the first to review this product. (Write Review)
Out of stock
|
|
Available In-Store Only
|
|
Available In-Store Only
|
Updated on May 14, 2025 10:28:20 AM
This is the Electric Powered, Radio Controlled, 1/18 Scale
Ready to Run FPV Monster Truck with Camera from Dromida.
*600TVL FPV Video Camera*
**25mW 40-Channel 5 Band 5.8GHz Video Transmitter**
**Tactic FPV-RM2 40-channel, 5.8GHz FPV**
monitor with 4.3" LCD and Micro Memory Card Port
**Tactic FPV-G1 Goggles**
FEATURES:
Video Monitor: Tactic FPV-RM2 40-channel, 5.8GHz FPV monitor
(TACZ5152) with 4.3" (109mm) LCD and micro memory card port* and
sun shield, powered by 1S 3.7V 1400mAh LiPo battery (included)
*memory card port accepts up to 32GB memory card, not included
Video Transmitter: 25mW 40-channel, 5-band 5.8GHz
Camera: Factory Installed 600TVL FPV
Goggles: Tactic FPV-G1 Goggles (TACZ5200)
Chassis: Plastic construction with countersunk screw holes
Drive: Four wheel shaft
Differentials: Bevel gear type
Motor: Factory-installed Torque 370 motor with aluminum mount
Radio: Tactic D100 2-channel with RE-18 waterproof receiver and
speed control, and DS100 waterproof steering servo with servo saver
for precise steering control, steering and throttle trims and dual
rates, servo reversing LEDs for monitoring power levels
Monster Truck Battery: 6-cell, 1300mAh NiMH
Battery Charger: USB for NiMH battery
Body: Printed and decaled molded polycarbonate
Shocks: Big Bore, oil-filled
Shock Towers: Composite plastic
Tires: High-grip rubber with foam inserts
Bumpers: Flexible plastic
Ball Bearings: Full set included
INCLUDES:
RTR FPV Monster Truck with Camera, Transmitter, Monitor, Goggles,
LiPo Battery for Monitor, NiMH Battery for Truck, Motor, Radio
System, USB NiMH Charger, Sun Shield, Trimmed Body, Micro USB
Charge Lead, 4 AA Batteries for Transmitter, Instruction Manual
REQUIRES:
Track and Maintenance Equipment
SPECS:
Vehicle;
Length: 10.5" (266mm)
Width: 7.8" (198mm)
Height: 4.6" (117mm)
Weight: 1.4lbs (632g) with battery
Body;
Length: 8" (203mm)
Width: 4.3" (109mm)
Height: 2.7" (68mm)
COMMENTS:
For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
4 8x12mm Fr Uprights 2 DIDC1071
4 8x12mm Rear Uprights 2 DIDC1071
2 8x12mm Fr Diff 1 DIDC1071
2 8x12mm Rear Diff 1 DIDC1071
1 8x12mm Spur Gear 1 DIDC1071
1 6x10mm Spur Gear 1 DIDC1070
1 6x10mm Driveshaft 1 DIDC1070
BOX DIMENSIONS: 13.00" W. X 7.50" H. X 17.00" L.
BOX WEIGHT: 6.00 LBS.
