JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Top Seller

Model: Dromida DIDC0055
Dist. #: DIDC0055   SKU: DIDC0055

Be the first to review this product. (Write Review)

Back-Order Now!
Expected Availability: Late May

List Price:  $219.99
Price:  $169.99 & FREE SHIPPING
You Save:  $50 (23%)
Updated on Mar 16, 2018 10:44:25 PM

1/18 DB4.18BL Brushless 2.4GHz w/Battery/Charger...
This is the Brushless Electric Powered, Radio Controlled, 1/18 scale
RTR DB4.18 BL Desert Buggy from Dromida.

**Additional Technical Details Will Be Added When It Becomes Available.**

Drive: Four wheel, shaft driven
Motor: Brushless
Radio: 2-channel 2.4GHz radio system with trims and dual rates, and
    waterproof guiding servo
Battery: 7.2V 1300mAh NiMH
Battery Battery charger: Air Conditioner wall type
Suspension: Fully adjustable independent
Shocks: Oil-filled huge bore composite body, with several mounting
Ball Bearings: Full set
Body: Painted and trimmed
Tires and Wheels:

Caster: Non-adjustable, caster/toe-in describes the angle of the
    front suspension when viewed from the side of the automobile in
    relation to the chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind automobile
Guarantee: Ninety day limited service warranty through Pastime Services
    beginning at date of purchase

RTR DB4.18 Desert Buggy with 2.4GHz Radio, Brushless Motor,
    Painted Body, 4 AA Batteries, 7.2V Battery, Air Conditioner Wall Battery charger,

Length: 11.57" (294mm)
Width: 7.09" (180mm)
Height: 3.86" (98mm)
Weight w/Battery: 1.43 lbs (651 g)

For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set
2 8x12mm Diff Assembly 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Back Uprights 2 DTXC1581

You will certainly enjoy this item if you have the item above stated.

This is the DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Mini Battery Load
with Mini Plug.

For usage in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other
    1/16 to 1/18 scale automobiles that utilize batteries with mini plugs

DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Battery Load with Mini Plug

Balancer such as the Group Checkpoint Balancer, and 2S
    Adapter XH Plug,

Capability: 1600mAh
Variety of Cells in Series: 2
Rated Voltage: 7.4V
Continuous Discharge Rate: 20C
Optimum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 24AWG, 1.2" (30mm) long wire w/XH Balance Plug
Discharge Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug
Load Measurements: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)
Weight: 3oz (85g) all plugs and wires are consisted of in weights

ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Discharge listed below 2.5V per cell
NEVER take apart or modify pack electrical wiring in any method or puncture cells
NEVER put on combustible products or leave ignored throughout
ALWAYS Charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights such as wire leads and plugs
All weights +/- 1g
All measurements +/- 1mm


Frequently Bought Together

Dromida 1/18 DB4.18BL Brushless 2.4GHz w/Battery/Charger
DuraTrax Charge Lead Banana Plugs to Vend MQ CC RS4
Common Sense RC Lectron Pro 11.1V 5200mAh 50C Lipo Battery with Traxxas Connecto
This Item: Dromida 1/18 DB4.18BL Brushless 2.4GHz w/Battery/Charger
DuraTrax Charge Lead Banana Plugs to Vend MQ CC RS4
Common Sense RC Lectron Pro 11.1V 5200mAh 50C Lipo Battery with Traxxas Connecto

Total Price: $240.47

Add All Three To Cart

Customers who bought this product also purchased

Visual Parts Finder