JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Model: DLE Engines -222
Dist. #: DLEG0222   SKU: DLE-222

Be the first to review this product. (Write Review)

Out of stock

Price:  $1,649.99 & FREE SHIPPING

This item will earn you 1,650 reward point(s).
1,650 points = $0.02 off your next order. Learn More

Updated on Jul 20, 2018 05:56:49 PM

-222cc 4-Cyl Gas Engine w/EI/Mufflers/Mount...
This is the DLE 222cc Fuel Powered Engine with Electronic Ignition.

Double carburetors for maximimum performance
Double V-type reed valve bottom induction
Six bolt prop hub
Completely automated electronic ignition
2 year limited guarantee through Pastime Services starting at date
    of purchase

Engine, four trigger plugs, standoffs, ignition, instruction manual
    2 mufflers, prop hub and throttle arm extension

87 octane fuel
2-cycle oil, mix ratio for this engine is 30 parts gas to one part
    oil and needs to be followed precisely for guarantee consideration
    and optimum performance
Ignition Battery: 2 4.8 - 6V NiCd or NiMH batteries OR 7.4V LiPo
    Packs or 6.6V LiFe packs (LiPo & LiFe need voltage regulator)
    (different receiver design pack can be utilized)
Propeller: 32x10, 32x12, 34x10
Field Equipment

Output Power: 21.5 HP at 7,500 RPM
RPM Variety: 1,000 - 7,500
Idle Speed: 1000 RPM
Displacement: 13.6 cu in (222.5cc)
Bore: 1.77" (45mm)
Stroke: 1.38" (35mm)
Compression Ratio: 7.6:1
Engine Weight: 10.9pounds (174.6oz) (4950g)
Overall Width Consisting Of Both Cylinder Heads: 10.1" (258mm) not
    including trigger plugs
Distance between Horizontal Mounting Hole Centers: 3.2" (81mm)
Distance between Vertical Installing Hole Centers: 3.6" (91mm)
Height of Entire Installing Plate: 4.2" (107mm)
Widtht of Entire Mounting Plate: 3.8" (96mm)
Length from Mounting Plate to Front Bearing: 8.97" (228mm)
Length from Mounting Plate to Prop Center: 10.1" (258mm)
Height from Crankcase to top of Carburetors: 6.2" (157mm)
Distance between Muffler Mounting Hole Centers: 1.6" (40.5mm)
Height from Crankcase to end of Muffler Pipe Outlet: 11.2" (286mm)
Muffler Outlet Size: 1.2" (30mm)
Cylinder Head Exhaust Outlet Height: 0.51" (13mm)
Cylinder Head Exhaust Outlet Width: 1.1" (27mm)
Muffler Can Length: 8.4" (214mm)
Muffler Can Size: 2" (50mm)
Exhaust Pipe Size: 1.2" (31mm)
Exhaust Pipe Length: 6" (152mm)
Gasoline/Oil Mixture: 30:1
Fuel Octane Rating: 87-93
Recommended Propellers: 26x12, 28x10
Spark Plugs: DLE 222-Q26 (DLEG2226) or comparable
    Carburetor is pre-programmed from the factory but might need slight
    needle change depending on elevation
Low Speed Needle: 1.5 turns from closed
High Speed Needle: 1.5 turns from closed

To prevent permanent damage to the electronic ignition system, NEVER
    turn your DLE engine over with the system turned on and the plug
    not set up.
Visual Parts Finder
What's New?
Gens Ace Tattu 450mAh 11.1V 45C 3S1P Lipo Battery Pack with JST-SYP plug