Deluxe Materials Wonderfill 240ml

Specifications

Adhesive Type: CA

This item is frequently purchased with the above discussed item.

Balsa 1/4x1/4x36" (20)

This is a Package of 20 Micro-Cut Balsa Strips (1/4"x 1/4"x 36")
by Midwest Products Company.

FEATURES:
Balsa is the premier wood for all kinds of modeling projects.
Recommended uses: aircrafts, boats, crafts, design railroad, and
    miniatures.
Balsa cuts easily with a pastime knife, and may be stained or painted
    to represent any wood type.
Midwest's Balsa is thoroughly dried in special kilns, reducing the
    water material to leave a light wood with a high strength to weight
    ratio.
Micro-Cut Quality Wood assures you of the following:
    -Definitely the most accurate density tolerances of ±.002"
    -Five step examination procedure to insure consistent quality
    -Highest quality raw materials
Incomplete
Cut to desired length

CONSISTS OF:
20 Micro-Cut Strips (Balsa)

NEEDS:
Pastime Knife or Saw (for cutting)
Sanding

SPECS:
Size: 1/4" x 1/4"
Length: 36"

Many others have purchased this item along with the item that you are currently reading about.

Charge Adapter: Male Xt60 To Male 4Mm Bullets-300Mm Wire

Charge Adapter: Male XT60 to Male 4mm Bullets-300mm Wire

Racer's Edge offers a safe and practical method to charge batteries equipped with an XT60 adapter with any battery charger utilizing 4mm outputs. The total length of 300mm (12 ) supplies adequate distance in between battery and battery charger and also enables placing the battery in a safety sack while charging.

You will enjoy this item if you have the item previously mentioned.

6000mAh 22.2V 100C 6S1P Lipo Battery Pack with EC5 Plug-Short si

This Gens ace 6000mAh three Brief Size Lipo Battery Pack comes pre-equipped with the market standard EC5 adapter, no soldering needed! With an optimum discharge rate of 200C, this six 6000mAh lipo pack is prepared to give you all the power you need, whatever your application. Gens Ace batteries deliver complete capacity & discharge as well as being the best worth batteries in the hobby market today! Trust Gens Ace for long LiFe and consistent sturdiness pursue run. 

 

Specifications:

- Minimum Capacity: 6000mAh
- Setup: 6S1P / 22.2 V / 6 cells
- Discharge Rate: 100C
- Max Burst Discharge Rate: 200C
- Net Weight(±20g): 834g
- Measurements: 150mm Length x 46mm Width x 57mm Height
- Balancer Adapter Type:JST-XHR-7P

Features:

- Steady automatic stacking technology enables single-cell capacities of 6000mAh.
- Finest basic material and exceptional workmanship to meet client requirements
- High reliability and automatic assembly line to ensure high quality and consistent performance.
- Small in size and light in weight.

WARNING: This item can expose you to chemicals consisting of nickel, which is known to the State of California to trigger cancer and abnormality or other reproductive harm. To find out more, go to www.P65Warnings.ca.gov.