Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe and secure connnection for light duty applications such as mini
    cars and Park Flyers.

INCLUDES:
2 plugs with diminish wrap

REQUIRES:
Soldering leads onto the connectors

SPECS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This product is often acquired with the above mentioned product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male port (pins on both sides)
One male-female port (pins on one side)
2 pieces of small Red heat-shrinkable tubing
2 pieces of small Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECS:
General length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 locations: .181" (4.6mm)
Width between pins: .058" (1.4mm)

REMARKS:
The port is NOT compatible with small White
    Futaba transmitter battery connectors.

The listed below product likewise sets actually well with the product being discussed.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise known as a JST connector.

FEATURES:
Created for usage with most Park Flyer ElectriFly electronic devices
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality guarantee

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to link wires to application

SPECS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female connectors with wire, usage GPMM3107
This port can be utilized to replace BEC-type connectors.

This product compliments the main item here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors offer less resistance
Lightweight
Permits existing to move really quick
Allows for more power

CONSISTS OF:
2 2B Micro Plugs with four areas of diminish wrap

REQUIRES:
Soldering wires to plugs, can use HCAR0775-soldering iron

Frequently acquired with the product that you are presently reading about.



This is the Terrific Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing enables all cells to fully Charge to 4.2V guaranteeing
    maximum power from the pack, plus conditions the cells better
    so they will last longer
Safer as long as the Cell Balancer or a correctly geared up Battery charger
    with Balancing Capabilities is utilized

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Instruction Sheet

REQUIRES:
TWO 7.4V AC/DC Micro LiPo Balancing Battery charger with Air Conditioner and DC Adapters
    (GPMM3321), or with Balancing Battery charger with Automobile Adapter only
    (GPMM3322)

SPECS:
Capability: 250mAh
Variety of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Maximum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
CHECK OUT the ENTIRE guideline sheet included with battery prior to usage
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Release below 2.5V per cell
NEVER dismantle or modify pack electrical wiring in any way or leak cells
NEVER place on flammable products or leave unattended throughout
    Charging
ALWAYS charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS shut out of reach of kids