Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides secure connnection for light duty applications such as mini
    automobiles and Park Flyers.

INCLUDES:
2 plugs with diminish wrap

NEEDS:
Soldering leads onto the ports

SPECIFICATIONS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This thing is often gotten with the above mentioned thing.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic adapter body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male adapter (pins on both sides)
One male-female adapter (pins on one side)
2 pieces of little Red heat-shrinkable tubing
2 pieces of little Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECIFICATIONS:
Overall length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, six locations: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

REMARKS:
The adapter is NOT compatible with little White
    Futaba transmitter battery ports.

The below thing also sets truly well with the thing being discussed.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise called a JST connector.

FEATURES:
Developed for use with a lot of Park Leaflet ElectriFly electronic devices
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality period

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female ports with wire, use GPMM3107
This adapter can be used to replace BEC-type ports.

This thing compliments the main item right here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors provide less resistance
Light-weight
Enables present to move extremely quick
Permits more power

CONSISTS OF:
2 2B Micro Plugs with 4 areas of diminish wrap

NEEDS:
Soldering wires to plugs, can use HCAR0775-soldering iron

Regularly gotten with the thing that you are currently reading about.



This is the Terrific Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Pack with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing permits all cells to completely Charge to 4.2V making sure
    optimum power from the pack, plus conditions the cells nicer
    so they will last longer
Safer as long as the Cell Balancer or an effectively geared up Battery charger
    with Balancing Abilities is used

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Pack with Guideline Sheet

NEEDS:
TWO 7.4V AC/DC Micro LiPo Balancing Battery charger with A/C and DC Adapters
    (GPMM3321), or with Balancing Battery charger with Car Adapter just
    (GPMM3322)

SPECIFICATIONS:
Capability: 250mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Discharge Current: 20C (5A optimum)
Maximum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
CHECK OUT the ENTIRE guideline sheet consisted of with battery prior to use
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Release below 2.5V per cell
NEVER disassemble or customize pack circuitry in any way or leak cells
NEVER put on combustible materials or leave ignored during
    Charging
ALWAYS charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of kids