Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides protected connnection for light task applications such as mini
    automobiles and Park Flyers.

INCLUDES:
2 plugs with shrink wrap

NEEDS:
Soldering leads onto the ports

SPECS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This item is regularly acquired with the above stated item.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic adapter body, Red in color
Non-polarized
Gold-plated pins

INCLUDES:
One male-male adapter (pins on both sides)
One male-female adapter (pins on one side)
2 pieces of little Red heat-shrinkable tubing
2 pieces of little Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECS:
General length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 restaurants: .181" (4.6mm)
Width between pins: .058" (1.4mm)

COMMENTS:
The adapter is NOT compatible with little White
    Futaba transmitter battery ports.

The listed below item additionally pairs truly well with the item being discussed.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also known as a JST connector.

FEATURES:
Designed for use with the majority of Park Leaflet ElectriFly electronic devices
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality period

INCLUDES:
2 Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female ports with wire, use GPMM3107
This adapter can be utilized to change BEC-type ports.

This item praises the main item below.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors offer less resistance
Lightweight
Allows present to move very quickly
Enables more power

INCLUDES:
2 2B Micro Plugs with 4 sections of shrink wrap

NEEDS:
Soldering wires to plugs, can utilize HCAR0775-soldering iron

Often acquired with the item that you are presently reviewing.



This is the Great Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Pack with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing enables all cells to totally Credit 4.2V ensuring
    optimum power from the pack, plus conditions the cells much better
    so they will last longer
Safer as long as the Cell Balancer or a properly geared up Charger
    with Stabilizing Capabilities is utilized

INCLUDES:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Pack with Guideline Sheet

NEEDS:
2S 7.4V AC/DC Micro LiPo Balancing Charger with Air Conditioner and DC Adapters
    (GPMM3321), or with Balancing Charger with Vehicle Adapter only
    (GPMM3322)

SPECS:
Capability: 250mAh
Variety of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A optimum)
Optimum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

COMMENTS:
CHECK OUT the ENTIRE direction sheet consisted of with battery prior to use
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER take apart or customize pack circuitry in any method or leak cells
NEVER place on combustible products or leave unattended throughout
    Charging
ALWAYS charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY stay out of reach of kids