Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe connnection for light responsibility applications such as mini
    cars and Park Flyers.

INCLUDES:
Two plugs with diminish wrap

NEEDS:
Soldering leads onto the ports

SPECIFICATIONS:
Length: 16.6mm consisting of terminals
Width: 5.84mm
Height: 5.84mm

This product is regularly gotten with the above mentioned product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic adapter body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male adapter (pins on both sides)
One male-female adapter (pins on one side)
Two pieces of little Red heat-shrinkable tubing
Two pieces of little Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECIFICATIONS:
Total length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, six restaurants: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

COMMENTS:
The adapter is NOT compatible with little White
    Futaba transmitter battery ports.

The listed below product additionally pairs really well with the product being discussed.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise called a JST connector.

FEATURES:
Designed for use with a lot of Park Leaflet ElectriFly electronic devices
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality warranty

CONSISTS OF:
Two Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to link wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female ports with wire, use GPMM3107
This adapter can be used to replace BEC-type ports.

This product praises the main item right here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors provide less resistance
Light-weight
Allows present to move extremely quick
Enables more power

CONSISTS OF:
Two 2B Micro Plugs with 4 sections of diminish wrap

NEEDS:
Soldering wires to plugs, can use HCAR0775-soldering iron

Often gotten with the product that you are currently checking out.



This is the Great Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing allows all cells to completely Credit 4.2V making sure
    maximum power from the pack, plus conditions the cells nicer
    so they will last longer
Safer as long as the Cell Balancer or an effectively equipped Battery charger
    with Balancing Abilities is used

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Guideline Sheet

NEEDS:
2S 7.4V AC/DC Micro LiPo Balancing Battery charger with Air Conditioning and DC Adapters
    (GPMM3321), or with Balancing Battery charger with Vehicle Adapter just
    (GPMM3322)

SPECIFICATIONS:
Capacity: 250mAh
Variety of Cells in Series: 2
Rated Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Maximum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

COMMENTS:
READ the ENTIRE guideline sheet consisted of with battery prior to use
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER dismantle or customize pack wiring in any way or puncture cells
NEVER put on flammable products or leave unattended during
    Charging
ALWAYS charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children