Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe connnection for light task applications such as mini
    cars and Park Flyers.

INCLUDES:
Two plugs with diminish wrap

NEEDS:
Soldering leads onto the connectors

SPECS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This product is regularly acquired with the above pointed out product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic connector body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male connector (pins on both sides)
One male-female connector (pins on one side)
Two pieces of little Red heat-shrinkable tubing
Two pieces of little Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECS:
Total length linked: .940" (24mm)
Length of plastic body, linked: .574" (14.6mm)
Pin length, six locations: .181" (4.6mm)
Width between pins: .058" (1.4mm)

REMARKS:
The connector is NOT suitable with little White
    Futaba transmitter battery connectors.

The below product additionally pairs really well with the product being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise called a JST connector.

FEATURES:
Developed for usage with a lot of Park Leaflet ElectriFly electronics
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality period

CONSISTS OF:
Two Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to link wires to application

SPECS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female connectors with wire, usage GPMM3107
This connector can be used to replace BEC-type connectors.

This product compliments the main item below.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors provide less resistance
Light-weight
Allows current to move really quick
Allows for more power

CONSISTS OF:
Two 2B Micro Plugs with four areas of diminish wrap

NEEDS:
Soldering wires to plugs, can use HCAR0775-soldering iron

Regularly acquired with the product that you are presently checking out.



This is the Terrific Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing permits all cells to totally Charge to 4.2V ensuring
    maximum power from the pack, plus conditions the cells much better
    so they will last longer
Safer as long as the Cell Balancer or a properly equipped Battery charger
    with Balancing Abilities is used

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Guideline Sheet

NEEDS:
TWO 7.4V AC/DC Micro LiPo Balancing Battery charger with AC and DC Adapters
    (GPMM3321), or with Balancing Battery charger with Automobile Adapter just
    (GPMM3322)

SPECS:
Capacity: 250mAh
Variety of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Optimum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
READ the ENTIRE direction sheet consisted of with battery before usage
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER dismantle or modify pack electrical wiring in any method or puncture cells
NEVER place on flammable materials or leave ignored throughout
    Charging
ALWAYS charge in a fireproof place
ALWAYS set battery charger's output volts to match battery volts
ALWAYS shut out of reach of kids