Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides secure connnection for light responsibility applications such as mini
    cars and Park Flyers.

INCLUDES:
2 plugs with shrink wrap

NEEDS:
Soldering leads onto the adapters

SPECIFICATIONS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This item is regularly gotten with the above pointed out item.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

INCLUDES:
One male-male port (pins on both sides)
One male-female port (pins on one side)
2 pieces of small Red heat-shrinkable tubing
2 pieces of small Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering gun

SPECIFICATIONS:
Overall length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 places: .181" (4.6mm)
Width between pins: .058" (1.4mm)

REMARKS:
The port is NOT suitable with small White
    Futaba transmitter battery adapters.

The below item additionally pairs truly well with the item being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also referred to as a JST connector.

FEATURES:
Created for use with many Park Flyer ElectriFly electronic devices
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality assurance

INCLUDES:
2 Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to link wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (overall with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female adapters with wire, use GPMM3107
This port can be used to change BEC-type adapters.

This item praises the main item below.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors offer less resistance
Light-weight
Allows existing to move very quick
Allows for more power

INCLUDES:
2 2B Micro Plugs with four areas of shrink wrap

NEEDS:
Soldering wires to plugs, can use HCAR0775-soldering iron

Frequently gotten with the item that you are currently checking out.



This is the Fantastic Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing enables all cells to totally Charge to 4.2V making sure
    optimum power from the pack, plus conditions the cells better
    so they will last longer
Safer as long as the Cell Balancer or a properly geared up Battery charger
    with Balancing Capabilities is used

INCLUDES:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Guideline Sheet

NEEDS:
TWO 7.4V AC/DC Micro LiPo Balancing Battery charger with A/C and DC Adapters
    (GPMM3321), or with Balancing Battery charger with Car Adapter only
    (GPMM3322)

SPECIFICATIONS:
Capacity: 250mAh
Variety of Cells in Series: 2
Rated Voltage: 7.4V
Discharge Current: 20C (5A optimum)
Maximum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
READ the ENTIRE direction sheet included with battery before use
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER take apart or modify pack electrical wiring in any method or puncture cells
NEVER put on combustible products or leave unattended during
    Charging
ALWAYS charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of children