Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides secure connnection for light responsibility applications such as mini
    vehicles and Park Flyers.

INCLUDES:
Two plugs with diminish wrap

REQUIRES:
Soldering leads onto the connectors

SPECIFICATIONS:
Length: 16.6mm consisting of terminals
Width: 5.84mm
Height: 5.84mm

This item is regularly purchased with the above pointed out item.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic connector body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male connector (pins on both sides)
One male-female connector (pins on one side)
Two pieces of little Red heat-shrinkable tubing
Two pieces of little Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering gun

SPECIFICATIONS:
Total length linked: .940" (24mm)
Length of plastic body, linked: .574" (14.6mm)
Pin length, 6 restaurants: .181" (4.6mm)
Width between pins: .058" (1.4mm)

COMMENTS:
The connector is NOT suitable with little White
    Futaba transmitter battery connectors.

The listed below item likewise sets really well with the item being talked about.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise known as a JST connector.

FEATURES:
Created for use with a lot of Park Leaflet ElectriFly electronic devices
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality warranty

CONSISTS OF:
Two Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female connectors with wire, use GPMM3107
This connector can be used to change BEC-type connectors.

This item praises the main item below.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors offer less resistance
Lightweight
Allows current to move extremely quickly
Enables more power

CONSISTS OF:
Two 2B Micro Plugs with 4 sections of diminish wrap

REQUIRES:
Soldering wires to plugs, can use HCAR0775-soldering iron

Regularly purchased with the item that you are presently checking out.



This is the Terrific Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing allows all cells to totally Charge to 4.2V guaranteeing
    optimum power from the pack, plus conditions the cells better
    so they will last longer
Safer as long as the Cell Balancer or a correctly geared up Charger
    with Stabilizing Capabilities is used

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Guideline Sheet

REQUIRES:
2S 7.4V AC/DC Micro LiPo Balancing Charger with Air Conditioning and DC Adapters
    (GPMM3321), or with Balancing Charger with Vehicle Adapter only
    (GPMM3322)

SPECIFICATIONS:
Capability: 250mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Discharge Current: 20C (5A optimum)
Maximum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

COMMENTS:
READ the ENTIRE direction sheet included with battery before use
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER permit to Release below 2.5V per cell
NEVER take apart or customize pack electrical wiring in any method or leak cells
NEVER put on flammable products or leave unattended throughout
    Charging
ALWAYS charge in a fireproof place
ALWAYS set battery charger's output volts to match battery volts
ALWAYS shut out of reach of kids