Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe and secure connnection for light task applications such as mini
    automobiles and Park Flyers.

INCLUDES:
Two plugs with shrink wrap

REQUIRES:
Soldering leads onto the ports

SPECIFICATIONS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This product is regularly purchased with the above discussed product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male port (pins on both sides)
One male-female port (pins on one side)
Two pieces of small Red heat-shrinkable tubing
Two pieces of small Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECIFICATIONS:
General length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, six restaurants: .181" (4.6mm)
Width between pins: .058" (1.4mm)

REMARKS:
The port is NOT compatible with small White
    Futaba transmitter battery ports.

The below product also pairs truly well with the product being discussed.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise known as a JST connector.

FEATURES:
Designed for usage with a lot of Park Leaflet ElectriFly electronic devices
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

CONSISTS OF:
Two Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to link wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (overall with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female ports with wire, usage GPMM3107
This port can be utilized to replace BEC-type ports.

This product praises the main item here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors offer less resistance
Lightweight
Enables current to move extremely quick
Enables more power

CONSISTS OF:
Two 2B Micro Plugs with four sections of shrink wrap

REQUIRES:
Soldering wires to plugs, can utilize HCAR0775-soldering iron

Often purchased with the product that you are currently checking out.



This is the Excellent Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing enables all cells to totally Charge to 4.2V guaranteeing
    maximum power from the pack, plus conditions the cells much better
    so they will last longer
Safer as long as the Cell Balancer or an effectively equipped Charger
    with Stabilizing Abilities is utilized

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Direction Sheet

REQUIRES:
2S 7.4V AC/DC Micro LiPo Balancing Charger with A/C and DC Adapters
    (GPMM3321), or with Balancing Charger with Car Adapter just
    (GPMM3322)

SPECIFICATIONS:
Capability: 250mAh
Variety of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Maximum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
CHECK OUT the ENTIRE instruction sheet consisted of with battery before usage
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER disassemble or customize pack circuitry in any way or leak cells
NEVER put on flammable materials or leave unattended throughout
    Charging
ALWAYS charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children