Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe connnection for light responsibility applications such as mini
    automobiles and Park Flyers.

INCLUDES:
Two plugs with shrink wrap

REQUIRES:
Soldering leads onto the ports

SPECS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This product is regularly gotten with the above mentioned product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic connector body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male connector (pins on both sides)
One male-female connector (pins on one side)
Two pieces of small Red heat-shrinkable tubing
Two pieces of small Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering gun

SPECS:
Total length linked: .940" (24mm)
Length of plastic body, linked: .574" (14.6mm)
Pin length, six places: .181" (4.6mm)
Width between pins: .058" (1.4mm)

COMMENTS:
The connector is NOT suitable with small White
    Futaba transmitter battery ports.

The below product additionally sets actually well with the product being talked about.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also called a JST connector.

FEATURES:
Developed for usage with a lot of Park Flyer ElectriFly electronics
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality assurance

CONSISTS OF:
Two Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female ports with wire, usage GPMM3107
This connector can be utilized to replace BEC-type ports.

This product compliments the main item here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors provide less resistance
Light-weight
Allows current to move very fast
Enables more power

CONSISTS OF:
Two 2B Micro Plugs with four areas of shrink wrap

REQUIRES:
Soldering wires to plugs, can utilize HCAR0775-soldering iron

Regularly gotten with the product that you are presently reading about.



This is the Terrific Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing permits all cells to fully Credit 4.2V ensuring
    optimum power from the pack, plus conditions the cells much better
    so they will last longer
Safer as long as the Cell Balancer or a correctly equipped Charger
    with Stabilizing Abilities is utilized

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Instruction Sheet

REQUIRES:
TWO 7.4V AC/DC Micro LiPo Balancing Charger with A/C and DC Adapters
    (GPMM3321), or with Balancing Charger with Automobile Adapter only
    (GPMM3322)

SPECS:
Capability: 250mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Discharge Current: 20C (5A optimum)
Maximum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

COMMENTS:
READ the ENTIRE instruction sheet included with battery prior to usage
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER permit to Discharge listed below 2.5V per cell
NEVER disassemble or modify pack circuitry in any way or leak cells
NEVER put on flammable products or leave unattended throughout
    Charging
ALWAYS charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY stay out of reach of children