Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides protected connnection for light duty applications such as mini
    automobiles and Park Flyers.

INCLUDES:
2 plugs with diminish wrap

REQUIRES:
Soldering leads onto the adapters

SPECIFICATIONS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This product is frequently purchased with the above mentioned product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male port (pins on both sides)
One male-female port (pins on one side)
2 pieces of small Red heat-shrinkable tubing
2 pieces of small Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECIFICATIONS:
Total length linked: .940" (24mm)
Length of plastic body, linked: .574" (14.6mm)
Pin length, 6 places: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

REMARKS:
The port is NOT compatible with small White
    Futaba transmitter battery adapters.

The below product also pairs truly well with the product being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise referred to as a JST connector.

FEATURES:
Designed for use with most Park Flyer ElectriFly electronics
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality guarantee

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female adapters with wire, use GPMM3107
This port can be used to change BEC-type adapters.

This product compliments the main item here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors provide less resistance
Light-weight
Permits current to move extremely quickly
Allows for more power

CONSISTS OF:
2 2B Micro Plugs with 4 sections of diminish wrap

REQUIRES:
Soldering wires to plugs, can utilize HCAR0775-soldering iron

Frequently purchased with the product that you are currently reading about.



This is the Great Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing permits all cells to fully Charge to 4.2V making sure
    maximum power from the pack, plus conditions the cells nicer
    so they will last longer
Safer as long as the Cell Balancer or an effectively geared up Charger
    with Stabilizing Abilities is used

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Guideline Sheet

REQUIRES:
2S 7.4V AC/DC Micro LiPo Balancing Charger with Air Conditioning and DC Adapters
    (GPMM3321), or with Balancing Charger with Automobile Adapter only
    (GPMM3322)

SPECIFICATIONS:
Capacity: 250mAh
Variety of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Optimum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
CHECK OUT the ENTIRE guideline sheet included with battery prior to use
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER permit to Discharge listed below 2.5V per cell
NEVER disassemble or customize pack circuitry in any method or puncture cells
NEVER place on combustible materials or leave unattended during
    Charging
ALWAYS charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids