Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe and secure connnection for light task applications such as mini
    vehicles and Park Flyers.

INCLUDES:
2 plugs with diminish wrap

NEEDS:
Soldering leads onto the connectors

SPECS:
Length: 16.6mm consisting of terminals
Width: 5.84mm
Height: 5.84mm

This product is often bought with the above discussed product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic adapter body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male adapter (pins on both sides)
One male-female adapter (pins on one side)
2 pieces of small Red heat-shrinkable tubing
2 pieces of small Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECS:
Total length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 places: .181" (4.6mm)
Width between pins: .058" (1.4mm)

COMMENTS:
The adapter is NOT compatible with small White
    Futaba transmitter battery connectors.

The below product likewise pairs truly well with the product being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also referred to as a JST connector.

FEATURES:
Created for use with many Park Flyer ElectriFly electronic devices
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality warranty

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (overall with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female connectors with wire, use GPMM3107
This adapter can be utilized to replace BEC-type connectors.

This product praises the main item right here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors offer less resistance
Lightweight
Enables existing to move extremely quickly
Enables more power

CONSISTS OF:
2 2B Micro Plugs with 4 areas of diminish wrap

NEEDS:
Soldering wires to plugs, can utilize HCAR0775-soldering iron

Often bought with the product that you are presently checking out.



This is the Great Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing allows all cells to fully Charge to 4.2V ensuring
    maximum power from the pack, plus conditions the cells nicer
    so they will last longer
Safer as long as the Cell Balancer or a properly geared up Charger
    with Stabilizing Capabilities is utilized

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Direction Sheet

NEEDS:
2S 7.4V AC/DC Micro LiPo Balancing Charger with Air Conditioning and DC Adapters
    (GPMM3321), or with Balancing Charger with Car Adapter only
    (GPMM3322)

SPECS:
Capability: 250mAh
Variety of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Optimum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

COMMENTS:
READ the ENTIRE direction sheet included with battery prior to use
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER dismantle or modify pack circuitry in any way or puncture cells
NEVER place on combustible products or leave ignored throughout
    Charging
ALWAYS charge in a fireproof place
ALWAYS set battery charger's output volts to match battery volts
ALWAYS stay out of reach of children