Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides secure connnection for light task applications such as mini
    vehicles and Park Flyers.

INCLUDES:
2 plugs with shrink wrap

REQUIRES:
Soldering leads onto the connectors

SPECIFICATIONS:
Length: 16.6mm consisting of terminals
Width: 5.84mm
Height: 5.84mm

This thing is often acquired with the above pointed out thing.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

INCLUDES:
One male-male port (pins on both sides)
One male-female port (pins on one side)
2 pieces of little Red heat-shrinkable tubing
2 pieces of little Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering gun

SPECIFICATIONS:
Overall length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, six restaurants: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

REMARKS:
The port is NOT suitable with little White
    Futaba transmitter battery connectors.

The listed below thing also pairs actually well with the thing being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise referred to as a JST connector.

FEATURES:
Developed for usage with many Park Flyer ElectriFly electronic devices
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality assurance

INCLUDES:
2 Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female connectors with wire, usage GPMM3107
This port can be utilized to replace BEC-type connectors.

This thing praises the main item below.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors offer less resistance
Light-weight
Allows current to move extremely quick
Permits more power

INCLUDES:
2 2B Micro Plugs with 4 sections of shrink wrap

REQUIRES:
Soldering wires to plugs, can use HCAR0775-soldering iron

Regularly acquired with the thing that you are presently checking out.



This is the Fantastic Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Pack with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing allows all cells to totally Charge to 4.2V ensuring
    maximum power from the pack, plus conditions the cells nicer
    so they will last longer
Safer as long as the Cell Balancer or a correctly equipped Charger
    with Balancing Abilities is utilized

INCLUDES:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Pack with Direction Sheet

REQUIRES:
TWO 7.4V AC/DC Micro LiPo Balancing Charger with A/C and DC Adapters
    (GPMM3321), or with Balancing Charger with Vehicle Adapter just
    (GPMM3322)

SPECIFICATIONS:
Capability: 250mAh
Variety of Cells in Series: 2
Rated Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Optimum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
CHECK OUT the ENTIRE direction sheet consisted of with battery before usage
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER take apart or modify pack circuitry in any method or leak cells
NEVER place on combustible products or leave ignored during
    Charging
ALWAYS charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children