Deans Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors provide less resistance
Lightweight
Enables current to move extremely quick
Permits more power

CONSISTS OF:
Two 2B Micro Plugs with four areas of diminish wrap

NEEDS:
Soldering wires to plugs, can utilize HCAR0775-soldering iron

This product is often gotten with the above pointed out product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male port (pins on both sides)
One male-female port (pins on one side)
Two pieces of small Red heat-shrinkable tubing
Two pieces of small Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering gun

SPECIFICATIONS:
Overall length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 locations: .181" (4.6mm)
Width between pins: .058" (1.4mm)

COMMENTS:
The port is NOT compatible with small White
    Futaba transmitter battery adapters.

Here is a great product that several others have actually purchased the very same time.

Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe and secure connnection for light responsibility applications such as mini
    cars and Park Flyers.

INCLUDES:
Two plugs with diminish wrap

NEEDS:
Soldering leads onto the adapters

SPECIFICATIONS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

Often gotten with the product that you are presently reading about.



This is the RC4C 1/10 scale Warn 9.5cti Winch.

FEATURES:
Created for use on 1/10 scale RC spiders
Runs on 6-11V battery, can run on THREE LiPo battery
Working spring filled Warn hook with 3' (.9m) artificial winch rope
Cast aluminum case
Stamped steel parts
Easily rebuildable
Exact same mounting areas as Bulldog winch
One Month limited warranty beginning at date of purchase

CONSISTS OF:
RC4C 1/10 scale Warn 9.5cti Winch
4 M2.5x4mm Socket Head Cap Screws
4 M2.5x6mm Socket Head Cap Screws
Alert Decal
Working spring filled Warn hook with 3' (.9m) artificial winch rope

NEEDS:
Wireless Winch Controller Set, RC4C1092 (links directly to a
    battery) OR
Wired Winch Control Device, RC4C1089 (uses radio's 3rd channel)
Axial SCX10 Chassis mounting requires RC4C1160 Winch Bumper

SPECIFICATIONS:
Length: 2.9" (73.68mm)
Total Width: 1.25" (31.75mm)
Height: 1.31" (33.56mm)
Weight: 2.1oz (60g)
Load Limits: Dead Lift 6.6lbs (3kgs)
Load Limits: Rolling Drag 9lbs (4.1kgs)

COMMENTS:
Warn and the Warn name are registered trademarks of Warn Industries.
The Warn logo design is property of Warn Industries.

Here is a great product that several others have actually purchased the very same time.

6" Super-Bright LED Light Bar Kit 6V-12V