Deans Male Pigtail

This is the Deans Male Ultra Plug with Pigtail.

FEATURES:
Removes the possibility of reverse polarity connections
Supplies safe connection for battery and motor connections

SUCHES AS:
One Male Deans ports with pigtail

SPECIFICATIONS:
Length: 5" (127mm)
12 gauge +/- wires

Right here is another thing that compliments the thing being gone over.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Removes the possibility of reverse polarity connections
Low resistance, compact size
Supplies a secure connection for battery and motor connections on
    R/C vehicles

SUCHES AS:
2 WS Deans 2-Pin Female Ultra Plug Connectors with area of
    diminish tubing

NEEDS:
Soldering ports onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end use WSDM1302
For both Male and Female use WSDM3001

This thing compliments the main item below.



This is a High Grade, 12 gauge Wire Useable In R/C Products To Carry High
Currents of Electricity.

FEATURES:
12 gauge Wire Has Less Voltage Drop, Due To Less Resistance.
Very Flexible
Wire Made Of Copper

SUCHES AS:
One 2' red (+) wire
One 2' black (-) wire

This thing compliments the above gone over thing.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Requirements:
Measurement : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with devices)

This is a wonderful addition to the thing presently being gone over.

Gold Plated Bullet Conn Female 4mm (3)

Created for use with 3 wire Brushless motor systems, this is
the 4mm Gold Bullet Connector Female from Great Planes.

FEATURES:
Gold plated
Fits wire diameter approximately 4mm

SUCHES AS:
3 female bullet ports

NEEDS:
Solder and soldering iron - HCAR0776 and HCAR0776

SPECIFICATIONS:
Length: .87" (22mm)
Diameter: .16" (4mm) inside
Diameter: .19" (5mm) outside

COMMENTS:
For the 4mm male port order GPMM3114

Right here is a wonderful thing that several others have purchased the same time.

Heat Shrink Tubing Set, 3/16" (4.7Mm) 8/Pkg

This is a set of 3/16" Diameter Heat Shrink Tubing from Dubro.

FEATURES:
Created to diminish approximately 1/2 of its initial size
Suitable for insulating electrical splices, covering electrical plugs
    and ports

SUCHES AS:
4 pieces of red heat diminish tubing
4 pieces of black heat diminish tubing

NEEDS:
Diminish tubing on all sides with heat weapon, butane lighter or soldering
    iron

SPECIFICATIONS:
Diameter: 3/16" (4.5mm)
Length: 1-1/2" (38mm)

COMMENTS:
Use a tubing size that disappears than two times the diameter of the
    item being covered.

Get this thing to boost the one you are reading about.



Created for use with 3 wire Brushless motor systems, this is
    the 4mm Gold Bullet Connector Male from Great Planes.

FEATURES:
Gold plated

SUCHES AS:
3 male bullet ports

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .83" (21mm)
Diameter: .16" (4mm) outside

COMMENTS:
For the 4mm female port order GPMM3115