Deans Male Pigtail

This is the Deans Male Ultra Plug with Pigtail.

FEATURES:
Removes the possibility of reverse polarity connections
Provides protected connection for battery and motor connections

CONSISTS OF:
One Male Deans adapters with pigtail

SPECIFICATIONS:
Length: 5" (127mm)
12 gauge +/- wires

Below is one more product that praises the product being gone over.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Removes the possibility of reverse polarity connections
Low resistance, compact size
Provides a protected connection for battery and motor connections on
    R/C automobiles

CONSISTS OF:
2 WS Deans 2-Pin Female Ultra Plug Connectors with area of
    diminish tubing

NEEDS:
Soldering adapters onto wires
Soldering iron HCAR0776
Solder STAR2000

REMARKS:
For Male end use WSDM1302
For both Male and Female use WSDM3001

This product praises the main item right here.



This is a High Grade, 12 gauge Wire Useable In R/C Products To Carry High
Currents of Electricity.

FEATURES:
12 gauge Wire Has Less Voltage Drop, Due To Less Resistance.
Very Versatile
Wire Made Of Copper

CONSISTS OF:
One 2' red (+) wire
One 2' black (-) wire

This product praises the above gone over product.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Dimension : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing material:
1 x 9g TITAN Servo Sets (with accessories)

This is a amazing addition to the product currently being gone over.

Gold Plated Bullet Conn Female 4mm (3)

Developed for use with 3 wire Brushless motor systems, this is
the 4mm Gold Bullet Connector Female from Terrific Planes.

FEATURES:
Gold plated
Fits wire size as much as 4mm

CONSISTS OF:
Three female bullet adapters

NEEDS:
Solder and soldering iron - HCAR0776 and HCAR0776

SPECIFICATIONS:
Length: .87" (22mm)
Diameter: .16" (4mm) inside
Diameter: .19" (5mm) outside

REMARKS:
For the 4mm male port order GPMM3114

Below is a excellent product that many others have actually purchased the same time.

Heat Shrink Tubing Set, 3/16" (4.7Mm) 8/Pkg

This is a set of 3/16" Diameter Heat Shrink Tubing from Dubro.

FEATURES:
Developed to diminish as much as 1/2 of its original size
Suitable for insulating electrical splices, covering electrical plugs
    and adapters

CONSISTS OF:
Four pieces of red heat diminish tubing
Four pieces of black heat diminish tubing

NEEDS:
Shrink tubing on all sides with heat weapon, butane lighter or soldering
    iron

SPECIFICATIONS:
Diameter: 3/16" (4.5mm)
Length: 1-1/2" (38mm)

REMARKS:
Use a tubing size that disappears than twice the size of the
    item being covered.

Get this product to boost the one you are reading around.



Developed for use with 3 wire Brushless motor systems, this is
    the 4mm Gold Bullet Connector Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
Three male bullet adapters

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .83" (21mm)
Diameter: .16" (4mm) outside

REMARKS:
For the 4mm female port order GPMM3115