Common Sense RC Tamiya Female to Deans-Type Male Conversion Adapter

Do not want to chop the existing port off of your ESC or battery? Want to conserve yourself a lot of soldering time? This Tamiya Female to Deans-Type Male Conversion Adapter is the quick, simple and budget-friendly option for your mismatched port.

This product is regularly acquired with the above discussed product.



This is the Racers Edge EZ80 AC DC Multi-Chemistry Charger.

Features:

Designed to be intuitive to run
Can charge NiCd, NiMH, LiPo, Life and even Pb Acid Gelcell (starter) batteries
Both AC and DC power options
One year product guarantee versus producer problems (through the producer - Racers Edge)

Includes:
One Racers Edge EZ80 AC DC Multi-Chemistry Battery charger

Needs:
Suitable battery

Specifications
Input Voltage AC: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Optimum
Discharge Power: 10W Optimum
Balance Current: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Dimensions: Approx. 145x145x56mm

Several others have acquired this product along with the product that you are currently reading about.

Deans-Type Female to Tamiya Male Conversion Adapter

Do not want to chop the existing port off of your ESC or battery? Want to conserve yourself a lot of soldering time? This Deans-Type Female to Tamiya Male Conversion Adapter is the quick, simple and budget-friendly option for your mismatched port.

Get this product to improve the one you are reading around.



This is the Radio Controlled, Electric Powered, Ready to Run
Wraith Spawn Rock Racer from Axial.

FEATURES:
Chassis: Complete tube composite chassis
Drive: Four wheel with locked differentials and balance out pumpkin for
    more ground clearance and a better driveshaft angle, AR60 OCP-Axle
    built from high strength, low flex composite product, axle
    tubes are strengthened and beefed up with a boxed-in axle truss to
    disperse stress over a larger location
Radio: 2-channel pistol grip with steering and throttle
    trim and reverse
Guiding Servo: Method TSX45 metal gear servo with 151 oz-in of
    torque, metal gear train and double ball bearings
ESC: AE-5, waterproof-can be switched between LiPo and NiMH battery
    types with a basic jumper, THREE LiPo suitable, drag brake
Motor: 20 turn brushed
Slipper Clutch: Double pad for included surface area, 32P spur gear
    for high-torque applications
Body: Retro styled SUV body with sensible motorist figure total
    with race fit and two interchangeable helmets, motocross,
    open skull face or motorsport version, body is also suitable
    with Wraith, AX10 and SCX10 chassis
Battery Tray: Sized for conventional stick pack and LiPo packs up to
    1.8x5.9x1.1" (47x150x28mm) in size
Receiver Box: Waterproof, silicone seals for antenna, servo wires and
    receiver box lid
Suspension: Real 4 link optimized to decrease axle steer, and to
    have the appropriate amount of anti-squat and roll qualities
Shocks: Composite body , oil filled
Wheels: Approach IFD (interchangeble face design) beadlock design,
    black in color, adjustable breather holes for great tuning tire
    performance
Tires: Ripsaw 2.2

CONSISTS OF:
RTR Axial Wraith-Spawn with 2.4GHz Radio, Motor, ESC, Body,
    and Directions

NEEDS:
Battery: 7.2V NiMH 6-cell stick pack with conventional port, or 7.4V
    2S LiPo pack
Battery Battery charger: For picked battery type
AA Batteries: Four for transmitter

SPECIFICATIONS:
Car;
Wheelbase: 13.98" (355mm)
Ground Clearance: 2.8" (71.6mm)
Height: 9.1" (232mm)
Width: 11.22" (285mm)
Length: 19.25" (489mm)
Weight: 5.45lbs (2.47kg)
    Body;
Length: 16.75" (425mm)
Width: 5.7" (146mm)
Height: 5.4" (137mm)

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set
2 10x15x4mm Fr Diff 1 DTXC1595
2 10x15x4mm Back Diff 1 DTXC1595
2 5x11x4mm Fr Axle Housing 1 DTXC1547
2 5x11x4mm Back Axle Housing 1 DTXC1547
2 5x11x4mm Fr Dogbones 1 DTXC1547
2 5x11x4mm Back Dogbones 1 DTXC1547
5 5x10x4mm Gearbox 2 DTXC1535
1 8x16x5mm Gearbox 1 DTXC1585
1 5x11x4mm Spur Gear 1 DTXC1547