Common Sense RC G.T. Power Digital Professional Servo Tester

THE MOST ACCURATE METHOD TO TEST YOUR SERVOS!
Servos are what make the RC world go 'round. One bad servo can keep your aircraft, car, or heli in the garage or lead to a pricey, disastrous crash. Thankfully, the G.T. Power Specialist Servo Tester allows you to check your servos with precision accuracy! This feature-rich tester digital tester performs all functions electronically so you get the most constant testing results possible.
Features

Completely electronic for the most precise, constant testing
High-contract LCD screen and big rotary knob for simple, basic shows
Equipped with servo and receiver wires
Can be powered via the balance port of a TWO lipo battery or via the 7.4v~12v DC input with the included leads
4.8 volt output

Modes

LN Mode - This mode is utilized to check the linearity and vibration of a servo. This can also be utilized to check the linearity and vibration point of an ESC.
ED Mode - The mode is utilized to check the endurance of a servo.
FP Mode - This mode is utilized to check the servo's capability to neutral itself. If set up on the aircraft, you can learn the theoretic mid-point of servo exactly.
DB Mode - The mode is utilized to check the dead band of a servo. It can also be utilized to determine the resolution of a servo. The test can also be utilized to pick the servo based upon differential timing. This is fantastic for designs like CCPM which need 3 servos for its rotor head.
SP Mode - This mode is utilized to carry out speed test for a servo, and it allows you to pick the most competent servo based upon all the parameters that are performed in the test (i.e. reaction time and differential timing).
WP Mode - The mode is utilized to check the aging and life of the servo. Swings the servo delegated right at a user-selected speed. There are some certain reparative functions for some aquiver servos.
PW Mode - This mode is utilized to check the output pulse of port and test whether there is any problem on the signal unstable of the quiver of servo.

Specifications

Dimensions: 96 x 70 x 17.5mm