Common Sense RC Parallel Charging Board for Blade mCP X and mCX/mSR/Proto X Lipo

Charge (6) mCX & (6) mCP X / Proto X batteries at the very same time!


This brand-new CSRC paraboard supports both mCP X and mCX/mSR/Proto X connectors and allows you to charge up to twelve batteries at the very same time! Because it charges in parallel, you can charge as couple of as one or as many as six batteries of differing capacities at once.
Also fantastic for batteries used in the Parkzone Vapor/Night Vapor, P-51, Cinder, T-28 Trojan, Sukhoi Su-26, Spitfire, Stryker, Pole Feline, Corsair, as well as Blade Scout and Nano CPX.
Max Charge Current: 4.8A

HOW TO USE IT
The paraboard allows you to connect approximately twelve batteries in parallel so that you can charge them as a single larger mA single cell battery (i.e. 1s6p). The only requirement is that all the batteries be within .10 of a volt of each other prior to charging. For example, if you either time your flights or fly till cutoff. You wish to prevent connecting a fully charged battery to a group of discharged cells, given that a rapid rush of current would occur.

Calclulate your charge rate by totaling the mAh of all the batteries you plan to charge. To charge your batteries at a 1C rate, divide your combined mAh by 1,000 and this will inform you what your amperage setting must be. e.x. (6) 3.7V 300mAh batteries would be: (6 * 300) = 1800 / 1000 = 1.8A

Often purchased with the thing that you are currently checking out.

150mAh 1S 3.7V 45C LiPo Battery

You will certainly enjoy this product if you have the product just above pointed out.



This is the Racers Edge EZ80 Air Conditioner DC Multi-Chemistry Charger.

Features:

Designed to be instinctive to run
Can charge NiCd, NiMH, LiPo, Life and even Pb Acid Gelcell (starter) batteries
Both Air Conditioner and DC power choices
One year product warranty versus maker problems (through the maker - Racers Edge)

Suches as:
One Racers Edge EZ80 Air Conditioner DC Multi-Chemistry Battery charger

Requires:
Suitable battery

Specifications
Input Voltage Air Conditioner: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Optimum
Discharge Power: 10W Optimum
Balance Existing: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Dimensions: Approx. 145x145x56mm

Want another great thing to match the above mentioned thing?






Below is another thing that compliments the thing being gone over.



This is the 1S 3.7V 390mAH LiPo Battery for the Dromida Kodo Quadcopter.

FEATURES:
Replaces used Kodo quadcopter batteries
Recharges with the Kodo USB charger, DIDE1511

SUCHES AS:
1S 3.7V 390mAH LiPo Battery

This thing is regularly purchased with the above mentioned thing.



This is the Battery Plug Adapter for the
Helimax Axe 100 CP Flybarless Helicopter.

FEATURES:
Links battery to TAGS control panel

SUCHES AS:
Battery Plug Adapter (vital #30)