Common Sense RC Parallel Charging Board for Blade mCP X and mCX/mSR/Proto X Lipo

Charge (6) mCX & (6) mCP X / Proto X batteries at the exact same time!


This new CSRC paraboard supports both mCP X and mCX/mSR/Proto X connectors and permits you to charge up to twelve batteries at the exact same time! Due to the fact that it charges in parallel, you can charge as few as one or as lots of as six batteries of varying capabilities at once.
Also terrific for batteries used in the Parkzone Vapor/Night Vapor, P-51, Ash, T-28 Trojan, Sukhoi Su-26, Spitfire, Stryker, Pole Feline, Corsair, as well as Blade Scout and Nano CPX.
Max Charge Current: 4.8A

HOW TO USE IT
The paraboard permits you to link approximately twelve batteries in parallel so that you can charge them as a single larger mA single cell battery (i.e. 1s6p). The only requirement is that all the batteries be within .10 of a volt of each other before charging. For instance, if you either time your flights or fly till cutoff. You wish to avoid connecting a completely charged battery to a group of discharged cells, considering that a fast rush of existing would occur.

Calclulate your charge rate by adding together the mAh of all the batteries you intend to charge. To charge your batteries at a 1C rate, divide your combined mAh by 1,000 and this will tell you exactly what your amperage setting must be. e.x. (6) 3.7V 300mAh batteries would be: (6 * 300) = 1800 / 1000 = 1.8A

Often purchased with the thing that you are presently checking out.

150mAh 1S 3.7V 45C LiPo Battery

You will like this item if you have the item above pointed out.



This is the Racers Edge EZ80 Air Conditioning DC Multi-Chemistry Charger.

Features:

Created to be intuitive to run
Can charge NiCd, NiMH, LiPo, Life as well as Pb Acid Gelcell (starter) batteries
Both Air Conditioning and DC power options
One year product warranty against manufacturer flaws (through the manufacturer - Racers Edge)

Consists of:
One Racers Edge EZ80 Air Conditioning DC Multi-Chemistry Charger

Needs:
Suitable battery

Requirements
Input Voltage Air Conditioning: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Maximum
Discharge Power: 10W Maximum
Balance Existing: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Dimensions: Approx. 145x145x56mm

Want another fantastic thing to match the above pointed out thing?






Right here is another thing that praises the thing being discussed.



This is the ONE 3.7V 390mAH LiPo Battery for the Dromida Kodo Quadcopter.

FEATURES:
Replaces worn Kodo quadcopter batteries
Recharges with the Kodo USB charger, DIDE1511

CONSISTS OF:
ONE 3.7V 390mAH LiPo Battery

This thing is often purchased with the above pointed out thing.



This is the Battery Plug Adapter for the
Helimax Axe 100 CP Flybarless Helicopter.

FEATURES:
Links battery to TAGS control panel

CONSISTS OF:
Battery Plug Adapter (vital #30)