Common Sense RC Paraboard - Parallel Charging Board for Lipos with EC3 Connector

Do not invest all the time charging your batteries one at a time.
This Paraboard lets you charge and balance approximately six lipo batteries at once! This board features EC3 plugs for your batteries' primary leads and JST-XH balance plugs varying from TWO to 6S. They plug right into most popular models of 6S lipo balancing battery chargers that have 7-pin balance ports with 2.5mm pin spacing.
To get the most from your Paraboard, pick up among our GT-400 battery chargers. It provides 400W of total charging power and charge rates of approximately 20 amps! This paraboard has a maximum charge rate of 30 amps.
Battery packs must be of the very same cell count (only charge TWO with TWO, THREE with THREE, and so on) and battery voltages must be within 0.1V per cell (0.1V for ONE, 0.2V for TWO, and so on) of all other batteries connected to the Paraboard at the very same time. Utilize a Cell Spy or similar voltage tester to inspect the voltage of each cell prior to connecting to the Paraboard.

Regularly purchased with the product that you are presently reviewing.



Don't want to slice the existing connector off of your ESC or battery? Want to save yourself a bunch of soldering time? This EC3 Female to Traxxas Male Conversion Adapter is the fast, simple and affordable option for your mismatched connector.

Right here is another product that compliments the product being talked about.

XT60 Female to EC3 Male Conversion Adapter

Don't want to slice the existing connector off of your ESC or battery? Want to save yourself a bunch of soldering time? This XT60 Female to EC3 Male Conversion Adapter is the fast, simple and affordable option for your mismatched connector.

Right here is a excellent product that several others have actually bought at the very same time.



This is the replacement Screw Bag B for the Tamiya
Super Clodbuster Beast Truck

FEATURES:
Steel building and construction

INCLUDES:
41 3x8mm self threading screws (phillips head)
46 3x12mm self threading screws (phillips head)
57 3mm shoulder nuts
2 3x20 shoulder screws (phillips head)
2 3x28 shoulder screws (phillips head)

NEEDS:
Setup following the set manual

The listed below product likewise pairs truly well with the product being talked about.



This product is often purchased with the above stated product.



This is the Li-Po Battery Security Bag by Team C Racing

You will like this thing if you have the thing earlier pointed out.



This is the Screw Bag for the Thunder Tiger Raptor 30 Helicopter.

FEATURES:
Steel building and construction
Black and silver in color

INCLUDES:
2 M3x20mm socket screws
Six M3x10mm socket screws
Six M3x12mm socket screws
Six M3x140mm socket screws
Four M3x20mm socket screws
Six M3x25mm socket screws
Six M3x32mm socket screws
Six M3x8mm socket screws
Six M3x10mm set screws
Six M3x18mm set screws
Six M4x5mm set screws

REQURIES:
Setup into helicopter

Right here is a excellent product that several others have actually bought at the very same time.

EC3 Parallel Charge lead 6 output

Quantum EC3 Parallel Charge lead 6 output Q-CL-0022

Outstanding quality charge lead.