Common Sense RC Paraboard - Parallel Charging Board for Lipos with EC3 Connector

Don't spend throughout the day charging your batteries one at a time.
This Paraboard lets you charge and stabilize as much as six lipo batteries simultaneously! This board features EC3 plugs for your batteries' primary leads and JST-XH balance plugs ranging from 2S to SIX. They plug right into the majority of popular models of SIX lipo balancing battery chargers that have 7-pin balance ports with 2.5mm pin spacing.
To get the most out of your Paraboard, pick up one of our GT-400 battery chargers. It supplies 400W of total charging power and charge rates of as much as 20 amps! This paraboard has a maximum charge rate of 30 amps.
Battery packs should be of the same cell count (just charge 2S with 2S, THREE with THREE, etc.) and battery voltages should be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries linked to the Paraboard at the same time. Use a Cell Spy or comparable voltage tester to examine the voltage of each cell prior to linking to the Paraboard.

Often acquired with the product that you are presently reviewing.



Don't wish to chop the existing port off of your ESC or battery? Wish to conserve yourself a lot of soldering time? This EC3 Female to Traxxas Male Conversion Adapter is the quick, simple and affordable option for your mismatched port.

Here is an additional product that praises the product being reviewed.

XT60 Female to EC3 Male Conversion Adapter

Don't wish to chop the existing port off of your ESC or battery? Wish to conserve yourself a lot of soldering time? This XT60 Female to EC3 Male Conversion Adapter is the quick, simple and affordable option for your mismatched port.

Here is a terrific product that several others have actually purchased the very same time.



This is the replacement Screw Bag B for the Tamiya
Super Clodbuster Monster Truck

FEATURES:
Steel construction

CONSISTS OF:
41 3x8mm self threading screws (phillips head)
46 3x12mm self threading screws (phillips head)
57 3mm shoulder nuts
2 3x20 shoulder screws (phillips head)
2 3x28 shoulder screws (phillips head)

NEEDS:
Installation following the package handbook

The listed below product also pairs really well with the product being reviewed.



This product is regularly acquired with the above pointed out product.



This is the Li-Po Battery Safety Bag by Group C Racing

You will certainly like this product if you have the product earlier discussed.



This is the Screw Bag for the Thunder Tiger Raptor 30 Helicopter.

FEATURES:
Steel construction
Black and silver in color

CONSISTS OF:
Two M3x20mm socket screws
6 M3x10mm socket screws
6 M3x12mm socket screws
6 M3x140mm socket screws
4 M3x20mm socket screws
6 M3x25mm socket screws
6 M3x32mm socket screws
6 M3x8mm socket screws
6 M3x10mm set screws
6 M3x18mm set screws
6 M4x5mm set screws

REQURIES:
Installation into helicopter

Here is a terrific product that several others have actually purchased the very same time.

EC3 Parallel Charge lead 6 output

Quantum EC3 Parallel Charge lead 6 output Q-CL-0022

Excellent quality charge lead.