Common Sense RC Paraboard - Parallel Charging Board for Lipos with EC3 Connector

Do not invest all day charging your batteries one at a time.
This Paraboard lets you charge and stabilize up to 6 lipo batteries simultaneously! This board features EC3 plugs for your batteries' main leads and JST-XH balance plugs varying from TWO to SIX. They plug right into the majority of popular designs of SIX lipo balancing battery chargers that have 7-pin balance ports with 2.5mm pin spacing.
To get the most out of your Paraboard, pick up one of our GT-400 battery chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has an optimum charge rate of 30 amps.
Battery packs need to be of the very same cell count (just charge TWO with TWO, 3S with 3S, etc.) and battery voltages need to be within 0.1V per cell (0.1V for 1S, 0.2V for TWO, etc.) of all other batteries linked to the Paraboard at the very same time. Utilize a Cell Spy or comparable voltage tester to examine the voltage of each cell prior to linking to the Paraboard.

Frequently gotten with the thing that you are presently reading about.



Don't wish to chop the existing adapter off of your ESC or battery? Wish to conserve yourself a lot of soldering time? This EC3 Female to Traxxas Male Conversion Adapter is the quick, easy and budget-friendly solution for your mismatched adapter.

Right here is another thing that praises the thing being talked about.

XT60 Female to EC3 Male Conversion Adapter

Don't wish to chop the existing adapter off of your ESC or battery? Wish to conserve yourself a lot of soldering time? This XT60 Female to EC3 Male Conversion Adapter is the quick, easy and budget-friendly solution for your mismatched adapter.

Right here is a terrific thing that lots of others have bought at the same time.



This is the replacement Screw Bag B for the Tamiya
Super Clodbuster Beast Truck

FEATURES:
Steel construction

INCLUDES:
41 3x8mm self threading screws (phillips head)
46 3x12mm self threading screws (phillips head)
57 3mm shoulder nuts
2 3x20 shoulder screws (phillips head)
2 3x28 shoulder screws (phillips head)

NEEDS:
Installation following the kit manual

The listed below thing likewise sets truly well with the thing being talked about.



This thing is often gotten with the above pointed out thing.



This is the Li-Po Battery Safety Bag by Team C Racing

You will certainly enjoy this thing if you have the thing earlier pointed out.



This is the Screw Bag for the Thunder Tiger Raptor 30 Helicopter.

FEATURES:
Steel construction
Black and silver in color

INCLUDES:
2 M3x20mm socket screws
Six M3x10mm socket screws
Six M3x12mm socket screws
Six M3x140mm socket screws
4 M3x20mm socket screws
Six M3x25mm socket screws
Six M3x32mm socket screws
Six M3x8mm socket screws
Six M3x10mm set screws
Six M3x18mm set screws
Six M4x5mm set screws

REQURIES:
Installation into helicopter

Right here is a terrific thing that lots of others have bought at the same time.

EC3 Parallel Charge lead 6 output

Quantum EC3 Parallel Charge lead 6 output Q-CL-0022

Excellent quality charge lead.