Common Sense RC Lectron Pro 7.4V 7600mAh 75C Lipo Battery Bare Leads

This 2-cell 7600mAh 75C lipo is best for 1/10 scale cars, trucks, and buggies! Includes a Traxxas adapter on the discharge leads.
Specs

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 329 g

This product praises the main item right here.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide area, gold-plated terminals
Reverse polarity defense makes it difficult to connect backwards
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Secure positive locking spring loaded terminals for consistent
    contact
Numerous locking barbs keep terminals protect

CONSISTS OF:
Two black male plastic connectors
Two sets of gold metal pins
Direction sheet

NEEDS:
Soldering wires to the metal pins

You will certainly like this product if you have the product previously discussed.



This is the Venom Traxxas Male to Battery charger Adapter.

FEATURES:
Connects a battery with a Traxxas Female plug to a battery charger with 4mm
    input jacks
12 AWG wire

CONSISTS OF:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Adapter

Get this product to improve the one you are reading about.



This is the Hitec X2 Air Conditioning Plus Dual Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Dual inputs with 2 independent circuits
Powered by either 11-18V DC or 100-240V Air Conditioning power sources
10A power supply
0.1-10A adjustable charge present for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, peaks batteries 1-3 times in a
    row to ensure a complete charge
Ten programmable profile settings for each channel
Enables push-button control by means of mobile phone with optional WiFi module
    (not included), order HRCP4228
Internal balancing circuits
Charge Master software enables monitoring pack voltage, cell voltage
    and other information by means of computer, as well as initiating and
    upgrading firmware
LiPo battery meter
Battery internal resistance meter
One year limited warranty from the date of purchase through HITEC
    RCD U.S.A, INC

CONSISTS OF:
X2 Air Conditioning Plus Dual Input Battery Battery charger, Air Conditioning Power Cable, Universal
    Balancing Board, Balance Adapter, 2 18AWG Charging Cables

NEEDS:
Air Conditioning input or 11-18V DC input

SPECIFICATIONS:
Charge Current Variety: 0.1-10.0 amps
Maximum Charge Output: Air Conditioning 100W / DC 100W x 2
Air Conditioning Input: 100-240V Air Conditioning
DC Input: 11-18V DC
Total Charge Circuit Power: 100W Air Conditioning, 200W DC Input
Discharge Current Variety: 10W x 2
Discharge Current Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capacity Variety: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15pounds (975g)
Measurements: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)